Corsair i160 OC settings?

9900k, liquid cooled

RTX2080TI, liquid cooled

32GB 2666 DDR4

480gb M.2

z370i mini-ITX

SF600, 80 plus Gold

W10

BIOS:

2.QJ 05/22/2019

Anyone OC this prebuild, what is your settings?

Hello

Searching OC settings for the i160 built.

I've used a general MSI guide and followed up a CPU bench with 3dmarks TIMESPY.

However I am not liking the result with manually OC.

These are the following steps I've taken from a MSI guide on youtube.

1. OC Explore Mode Set to [Expert]

CPU Ratio Apply Mode [All Core]

CPU Ratio 50

CPU Ratio Mode [Fixed Mode] All Run at 5Ghz no matter what for system stability

CPU Ratio Offset When Running AVX [-3] Tip from the guide

2.

DigitALL Power>

CPU Loadline Calibration Control [Mode 4] Perfect no matter what load see diagram rightside in bios

3.

CPU Core Voltage 1.320

CPU SA Voltage 1.200

CPU IO Voltage 1.200

DRAM Voltage 1.360

4.

Overclocking\CPU Features

Intel C-State [Disable] (Power saving mode)

Alternative that has been applied and followed

CPU Ring Ratio 47 3 under

CPU Core Voltage Mode "override och auto (same?)

-

I haven't set a throttling temperature - should I?

My temperature with the fan curve is a bit weird, the CORE0 is higher than the others and overallt the temps jumps a bit.

Looking at the HW monitor the voltage of i9900k jumps between 1.215(4)-1.3.

-

3DMARKSCORE TIMESPY CUSTOM

-GPU

-DEMO

Results:

1. STOCK

3DMark CPU test score 9 057 (3.6Ghz) 9169 with XMP enable

2. Game Boost

3DMark CPU test score 10 426 (4.8Ghz / 4000Ghz in the end) 10 242 with XMP enable

3. Enhanced Turbo + XMP

CPU-Z (5GHZ Singel thread 582.3 Multiply thread5050.1

3DMark CPU test score 10 575 (5GHZ dropped too 4.4 then back up too 5GHZ)

4. 5Ghz Overclock + XMP

CPU-Z (5GHZ ST 587.9 MT 5242.3/ 3DMark CPU test score 8 784 (It went down to lower rates aswell)

I am looking for a 5-5.2 overclock if possible. Any suggestions, guidelines is appreciated.

Also something I noticed is with the XMP enable, my stats at CPU-Z memory I dont think it works, dont know what value I should see but should it not be, show more(doubble) than 1333 in DRAM freq?

/Cheers