Titan777 Posted December 9, 2019 Share Posted December 9, 2019 (edited) Hi guys, I hope this is the correct forum. I would like help to set up my fans, etc. 1 Hydro H115i that I swapped it's two 140ML fans with 140LL fans.2 additional 120LL fans in front of the 500D RGB case and 1 120LL fan on back.Corsair HX750i.Corsair RGB Led Lighting PRO with Lighting Node Pro. Total is 6 LL fans 1 Led lighting pack 1 i Power supply. I also have Commander Pro and I think 2 USB fan hubs. Please advise what is the best diagram to connect all of them? Thank you! :biggrin: Edited December 9, 2019 by Titan777 Link to comment Share on other sites More sharing options...
BlaiseP Posted December 10, 2019 Share Posted December 10, 2019 Hi guys, I hope this is the correct forum. I would like help to set up my fans, etc. 1 Hydro H115i that I swapped it's two 140ML fans with 140LL fans.2 additional 120LL fans in front of the 500D RGB case and 1 120LL fan on back.Corsair HX750i.Corsair RGB Led Lighting PRO with Lighting Node Pro. Total is 6 LL fans 1 Led lighting pack 1 i Power supply. I also have Commander Pro and I think 2 USB fan hubs. Please advise what is the best diagram to connect all of them? Thank you! :biggrin: A Commander Pro has 6 x 3/4-pin fan ports and 2 x USB 2.0 headers. As for the diagram, have a look at Zotty's CORSAIR RGB Hardware and iCUE Eco-System FAQ and scroll down to the diagram "Corsair RGB Fan & Commander Pro Setup." Link to comment Share on other sites More sharing options...
Zotty Posted December 10, 2019 Share Posted December 10, 2019 assuming you have the H115i Pro... then this one suites you... the only thing i would change is the 2 fans on your radiator, which need to be powered (make them spin) by the h115 (this ensures correct operation of your cooling system regardless of other hardware/software) http://i.imgur.com/XSDWsnel.png Link to comment Share on other sites More sharing options...
Titan777 Posted December 10, 2019 Author Share Posted December 10, 2019 assuming you have the H115i Pro... then this one suites you... the only thing i would change is the 2 fans on your radiator, which need to be powered (make them spin) by the h115 (this ensures correct operation of your cooling system regardless of other hardware/software) http://i.imgur.com/XSDWsnel.png Thanks! I have the H115i RGB Platinum 280mm but I have changed its ML140 fans with LL140 fans to match the build and case. Does your diagram still work for me? I also have Corsair LED stirps with the Lighting Node Pro: Do I need to connect the HX750i USB to the motherboard or to the Commander Pro? Link to comment Share on other sites More sharing options...
Titan777 Posted December 10, 2019 Author Share Posted December 10, 2019 (edited) http://i.imgur.com/ICBYkWkl.png This is exactly what I have, just swapped the H115i RGB Platinum ML fans with new LL fans. I read that I should not connect the AIO LL fans to the CoPo, only to the Fan Hub. Is that correct? And my power supply is HX750i. Do I still connect everything according to this diagram? I wonder if the H115i shouldn't go to any hub, just directly to the commander pro as shown? There's no need to use my Lighting Node Pro? Edited December 10, 2019 by Titan777 Link to comment Share on other sites More sharing options...
Zotty Posted December 11, 2019 Share Posted December 11, 2019 (edited) the h115i platinum is self contained.. runs its own fans for both speed and rgb. no hub required buddy.. install and run as its manual says ;).. and the rest of that diagram is fine ;).. its one of mine isnt it?? lol. i have made soooo many its hard to keep up hahaha PSU and AIO may aswell be connected to the CoPro dude... you are good to go mate Edited December 12, 2019 by Zotty Link to comment Share on other sites More sharing options...
Titan777 Posted December 11, 2019 Author Share Posted December 11, 2019 (edited) the h115i platinum is self contained.. runs its own fans for both speed and rgb. no hub required buddy.. install and run as its manual says ;).. and the rest if that diagram is fine ;).. its one of mine isnt it?? lol. i have made soooo many its hard to keep up hahaha PSU and AIO may aswell be connected to the CoPro dude... you are good to go mate Thanks bro. I think it's all working correctly. Why does it take a long time for the ICUE to show the CoPro fans? Edited December 11, 2019 by Titan777 Link to comment Share on other sites More sharing options...
Zotty Posted December 12, 2019 Share Posted December 12, 2019 Thanks bro. I think it's all working correctly. Why does it take a long time for the ICUE to show the CoPro fans? whats a long time dude? and when is this happening? Link to comment Share on other sites More sharing options...
Titan777 Posted December 13, 2019 Author Share Posted December 13, 2019 (edited) whats a long time dude? and when is this happening? Suddenly I hear the fans noise increase, I go into the ICUE to see the rpm's and nothing shows up, only voltages. It took 20 minutes for it to show up and once it did, the fans were back to being silent. This is very weird, is it working properly? Edited December 13, 2019 by Titan777 Link to comment Share on other sites More sharing options...
DevBiker Posted December 13, 2019 Share Posted December 13, 2019 That's normally indicative of a conflict. Are you running HWInfo? Or have you run it before and installed the resident driver (the default)? Link to comment Share on other sites More sharing options...
Titan777 Posted December 15, 2019 Author Share Posted December 15, 2019 Nope. Never heard of this software. Today I didn't have this issue, hope it's gone somehow. By the way, is there an option to decrease the 500D RGB power button led? It's very bright. Link to comment Share on other sites More sharing options...
Titan777 Posted December 16, 2019 Author Share Posted December 16, 2019 That's normally indicative of a conflict. Are you running HWInfo? Or have you run it before and installed the resident driver (the default)? I think I know what happens. The commander pro suddenly disconnects. I can hear the USB sound notification when it happens and the fans suddenly increase rpm and the CoPro doesn't show the fans anymore. I have Gigabyte X570 Master. Link to comment Share on other sites More sharing options...
Titan777 Posted December 20, 2019 Author Share Posted December 20, 2019 someone knows about this issue? Link to comment Share on other sites More sharing options...
Recommended Posts