baan.sti Posted November 4, 2020 Share Posted November 4, 2020 Hi, by mistake i was updating the firmware of my H115i and now its bricked Would anyone know where can i get the hex file to force the update or whats the name of the file cause I havent been able to find it in my computer and I been looking or if any of u have the same radiator and can share with me the hex file I really need help :( I will appriciate any help! Link to comment Share on other sites More sharing options...
TacoRaptor Posted November 21, 2020 Share Posted November 21, 2020 I'm currently going through this exact same issue. Same cooler as well. I put in a support ticket, but I hope I get a response soon. Fairly certain if I had the firmware and could do a manual flash of it, it'd work just fine again. Link to comment Share on other sites More sharing options...
BladeXR Posted December 5, 2020 Share Posted December 5, 2020 Guys did you get the hex file from support? I just happened to suffer the same bad luck. I'm starting to hate this brand. Please help Link to comment Share on other sites More sharing options...
BladeXR Posted December 5, 2020 Share Posted December 5, 2020 Guys did you get the hex file from support? I just happened to suffer the same bad luck. I'm starting to hate this brand. Please help Well, to anyone in facing the same issue, I'm going to leave a link to the firmware for the iCUE H115i RGB Pro XT, just in case. I resurrected my bricked aio with the manual method. Firmware: https://file.io/xlYREDAT8ifi Link to comment Share on other sites More sharing options...
KbZa22 Posted December 6, 2020 Share Posted December 6, 2020 Well, to anyone in facing the same issue, I'm going to leave a link to the firmware for the iCUE H115i RGB Pro XT, just in case. I resurrected my bricked aio with the manual method. Firmware: https://file.io/xlYREDAT8ifi Hi! I have the same problem :(. Can you please upload again this Firmware file? Link to comment Share on other sites More sharing options...
mime29 Posted December 7, 2020 Share Posted December 7, 2020 Is this really happening? Btw: The Pro XT firmware update is made automatically by which software? Link to comment Share on other sites More sharing options...
KbZa22 Posted December 7, 2020 Share Posted December 7, 2020 Is this really happening? Btw: The Pro XT firmware update is made automatically by which software? The software that suggests firmware update is iCUE (Corsair official) Link to comment Share on other sites More sharing options...
chjohans Posted December 8, 2020 Share Posted December 8, 2020 Anyone have the firmware file? I Just bricked my H115i Pro Xt the exact same way, and the firmware file in the link above has been deleted. Reached out to Corsair but who knows if and when they'll respond. Link to comment Share on other sites More sharing options...
BladeXR Posted December 8, 2020 Share Posted December 8, 2020 Guys it seems the file was deleted from the site I uploaded it before. Try this new link: download FW Link to comment Share on other sites More sharing options...
KbZa22 Posted December 8, 2020 Share Posted December 8, 2020 Guys it seems the file was deleted from the site I uploaded it before. Try this new link: download FW Thanks!!!! :biggrin: Link to comment Share on other sites More sharing options...
BladeXR Posted December 8, 2020 Share Posted December 8, 2020 Thanks!!!! :biggrin: YW, that link will only be available for 30 days, that's the maximum they offer to have it free. Link to comment Share on other sites More sharing options...
chjohans Posted December 8, 2020 Share Posted December 8, 2020 Thanks a million, BladeXR, you just made my day. My H115i is up and running again with the latest firmware. Lesson learned (disable HWiNFO when updating the firmware) and I saved a copy of the firmware just in case. :) Link to comment Share on other sites More sharing options...
KbZa22 Posted December 8, 2020 Share Posted December 8, 2020 Thanks a million, BladeXR, you just made my day. My H115i is up and running again with the latest firmware. Lesson learned (disable HWiNFO when updating the firmware) and I saved a copy of the firmware just in case. :) Same here, it´s alive!!! Many thanks @BladeXR. Santa has arrived :D: Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Nick Posted December 14, 2020 Corsair Employee Share Posted December 14, 2020 For visibility, the firmware files are also available from our support team. You can request them through the following portal: https://support.corsair.com/ Link to comment Share on other sites More sharing options...
KbZa22 Posted December 15, 2020 Share Posted December 15, 2020 For visibility, the firmware files are also available from our support team. You can request them through the following portal: https://support.corsair.com/ Thanks Nick. In my case, mi Ticket December 5: After update Firmware vía iCUE the AIO is dead, fan fullRPM and not recognized by iCUE software. Please I need you send me via MP the ZIP firmware of mi AIO. Many thanks. Corsair Response December 8 was simple iCUE reinstall :/ Maybe my English is so bad that the person who answered my ticket did not understand me :[pouts: Link to comment Share on other sites More sharing options...
ConfusedRaccoon Posted January 17, 2021 Share Posted January 17, 2021 I also tried updating my the H115i rgb xt I just bought and it keeps ramping fans to 100% and failing to update after 5 minutes. FYI to OP, restarting your system should reset it back to a useable state. I'm really not impressed with the whole icue software though, Basic fan control that takes upto 30 seconds to respond. No fancurves or customisation of anysort. No ability to adjust fans manually as they're plugged into the pump, not a mobo header. If anyone has a link or info on whatever update it's trying to get would be nice. It's currently running firmware v.1.01.22. Link to comment Share on other sites More sharing options...
nrow01 Posted January 21, 2021 Share Posted January 21, 2021 Hi guys, can someone help me with a new link (because the old one is expired) for the firmware for Corsair H115 RGB pro xt, because I have the same problem with the broken firmware update from the iCUE software, I think I briked the pump. Thank you guys. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Notepad Posted January 21, 2021 Corsair Employee Share Posted January 21, 2021 (edited) Hi guys, can someone help me with a new link (because the old one is expired) for the firmware for Corsair H115 RGB pro xt, because I have the same problem with the broken firmware update from the iCUE software, I think I briked the pump. Thank you guys. You will need to contact our support team by opening a ticket at https://help.corsair.com Edited January 22, 2021 by Technobeard Link to comment Share on other sites More sharing options...
nrow01 Posted January 22, 2021 Share Posted January 22, 2021 I've already done that, I'm waiting for an answer from the support department ->Your ticket number is (2003961334) :( Link to comment Share on other sites More sharing options...
wkamil Posted February 27, 2021 Share Posted February 27, 2021 Hello, my H115i RGB PRO XT is also bricked after firmware update failure... maybe someone send me firmware file for manual update, 'cos this full blas fans sound is driving me crazy :( I have a tricket from corsair help, but don't know when someone answer me :( Link to comment Share on other sites More sharing options...
reantum Posted February 28, 2021 Share Posted February 28, 2021 Hello, my H115i RGB PRO XT is also bricked after firmware update failure... maybe someone send me firmware file for manual update, 'cos this full blas fans sound is driving me crazy :( I have a tricket from corsair help, but don't know when someone answer me :( Dude, i've same problem. I can't update my h150i rgb pro xt cooler. I need Firmware 1.1.32 file. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Notepad Posted March 1, 2021 Corsair Employee Share Posted March 1, 2021 Completely close down all other third-party software when attempting to update the firmware of the device. Also make sure the cooler is directly plugged into the USB port on the physical motherboard and not some sort of hub. Beyond that if you need further assistance you will need to reach out to our support team by opening a ticket at https://help.corsair.com. Link to comment Share on other sites More sharing options...
Dr_Solitarius Posted March 23, 2021 Share Posted March 23, 2021 Dude, i've same problem. I can't update my h150i rgb pro xt cooler. I need Firmware 1.1.32 file. Same trouble with same cooling system :( I wrote to support, now waiting for answer... Link to comment Share on other sites More sharing options...
ekaraot Posted March 31, 2021 Share Posted March 31, 2021 h115i rgb pro xt firmware 1.1.32 hex files? i am retry manually error again auto. three-four ticket no answer.. Link to comment Share on other sites More sharing options...
ekaraot Posted March 31, 2021 Share Posted March 31, 2021 Your request (2004179184) three day. no answer. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now