Bolt_Upload Posted October 25, 2020 Share Posted October 25, 2020 New build. Pump and RAM showing RGB but AIO fans are not. They are spinning but with no lights. I do not have a Corsair hub. Do I need one to activate the fan lights or have I made a mistake in the build? I [thought] I followed the Corsair video and the manual however, my CPU FAN connector has four pins and not three as is on the connector coming from the pump - it is the one that is attached to the SATA connection. The rails on the top of the Corsair connector are offset so that three pins will work with one left exposed on the outside so maybe it should work. Also, the PSU is 9-10 years old although modular, maybe it is lacking mainstream technology. Thank you for any suggestions you could offer. Link to comment Share on other sites More sharing options...
c-attack Posted October 25, 2020 Share Posted October 25, 2020 The fan included on the XT series coolers are not RGB. Lights are on the pump/block housing only. Link to comment Share on other sites More sharing options...
Bolt_Upload Posted October 28, 2020 Author Share Posted October 28, 2020 Thanks for clarifying that. So much to learn..... Link to comment Share on other sites More sharing options...
Nujabes Posted December 19, 2020 Share Posted December 19, 2020 Can confirm the 2 gray fans that come w/ the AIO are non-RGB capable fans. Only the pump housing has RGB capabilities. Link to comment Share on other sites More sharing options...
Recommended Posts