akisax Posted January 23, 2016 Share Posted January 23, 2016 Hello, I have a Vengeance 1500 V2 Headset since quite a long time and it worked OK apart the too loud sound. Lately, it has stopped working when I connected it to my USB. I tried installing it again, but the installation program (version 2.0.37) fails to install the driver. I also tried with 2.0.16 with same result. Could you help me ? I am on Win 7 ultimate 64 bits. When I look on the properties of the head set, pilot date is 14/08/2014, version 1.0.0.30 Sincerely Link to comment Share on other sites More sharing options...
Toasted Posted January 23, 2016 Share Posted January 23, 2016 Is the headset listed in Playback devices? You can check by right clicking the speaker icon in the notifications tray > Playback devices. Are there any errors listed for the headset in Device Manager? Link to comment Share on other sites More sharing options...
akisax Posted January 23, 2016 Author Share Posted January 23, 2016 Thank for your reply. Yes, the headset is listed in the devices. I have this error in the properties of the headset : "Ce périphérique ne peut pas démarrer. (Code 10)" The problem is that the driver would not install. I uninstalled it in the properties of the headset, uninstalled the Corsair command panel program and cleaned the register with Ccleaner to make a clean install. With all that done, the install program would still not install the driver. I really do not understand. PS : attached file : what I see of the driver Link to comment Share on other sites More sharing options...
akisax Posted January 24, 2016 Author Share Posted January 24, 2016 Hello, This morning, as I turned my computer on, the headset was there and working ! After I unplugged it and plugged it again, it was not recognised and not working again ! I turned my computer off, then on : the headset was working. I never had this behavior before. Does anyone have an explanation ? Link to comment Share on other sites More sharing options...
Toasted Posted January 24, 2016 Share Posted January 24, 2016 Do you have the latest BIOS, chipset drivers, Window supdate etc all up to date? The drivers for the headset are installed. There is nothing wrong with it. The headset is not working for some reason. Link to comment Share on other sites More sharing options...
akisax Posted January 25, 2016 Author Share Posted January 25, 2016 As far as I know, everything is up to date. I make the updates as they come. Only W10 was blocked ;-) Link to comment Share on other sites More sharing options...
Toasted Posted January 26, 2016 Share Posted January 26, 2016 Have you tried a different USB port? Try the headset on another computer. Does it work fine? Link to comment Share on other sites More sharing options...
akisax Posted January 29, 2016 Author Share Posted January 29, 2016 Hello, I tried another USB to the same result. As the headset is functional when it is plugged on when I turn the compter on, I finally choosed to put the headset permanently on a free USB at the rear of my unit. I then choose the default device for the sound. It is not as convenient as plugging and unplugging the headset, but it will do. Please consider the problem solved. Thank you for your care. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.