The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cooling

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #31  
Old 06-24-2019, 02:54 PM
Biru Biru is offline
Registered User
 
Join Date: Jun 2019
Posts: 1
POST ID # = 1009156
Biru Reputation: 10
Default

Quote:
Originally Posted by Pillakachu View Post
Me pasa lo mismo a mi. La cambie por otra y sigue igual. El programa icue detecta la bomba y funciona correctamente pero no se ilumina.
Mi equipo es:
Gigabyte z390 gaming x
9700k
2x8gb corsair vengance
Gigabite 2080 gaming oc
Tracers mars vulcano 750w
Y todo montado en una Corsair spec omega rgb
He llegado a pensar que sea problema de la fuente de alimentacion pero es un simple Sata
Al final en que ha quedado el tema, tengo el mismo problema con dos liquidas iguales la H100i Platinum y la normal. Todo funciona bien menos el RGB de la bomba.
Reply With Quote


  #32  
Old 06-26-2019, 02:31 PM
Corsair Art's Avatar
Corsair Art Corsair Art is offline
Corsair Employee
 
Join Date: Feb 2016
Posts: 624
POST ID # = 1009397
Corsair Art Reputation: 14
Default

Quote:
Originally Posted by Biru View Post
Al final en que ha quedado el tema, tengo el mismo problema con dos liquidas iguales la H100i Platinum y la normal. Todo funciona bien menos el RGB de la bomba.
Con todo lo que mencionas si hemos estado pensando que el problema podria ser la fuente. Si puedes tratar de usar otra?
Reply With Quote


  #33  
Old 07-12-2019, 01:28 PM
neiljr2123 neiljr2123 is offline
Registered User
 
Join Date: Jul 2019
Posts: 1
POST ID # = 1010969
neiljr2123 Reputation: 10
Default

Does the h100i use 3.3v pins for the RGB lighting?
Asking because if it does you must check to make sure you are using a 5 wire SATA plug (and not a 4 wire) from your power supply and that it remains 5 plugs all the way to the pump.
Many sata cables are lacking the orange (3.3v) wire. Also because molex doesn't support 3.3v, an attached molex adatper in the chain will remove it's 3.3v capabilities.

TL/DR: Try a 5 wire SATA cable.

Last edited by neiljr2123; 07-12-2019 at 02:10 PM.
Reply With Quote


  #34  
Old 10-18-2019, 10:25 AM
jdtechgear jdtechgear is offline
Registered User
 
Join Date: Oct 2019
Posts: 1
POST ID # = 1021659
jdtechgear Reputation: 10
Default This solved the issue for me

Quote:
Originally Posted by neiljr2123 View Post
Does the h100i use 3.3v pins for the RGB lighting?
Asking because if it does you must check to make sure you are using a 5 wire SATA plug (and not a 4 wire) from your power supply and that it remains 5 plugs all the way to the pump.
Many sata cables are lacking the orange (3.3v) wire. Also because molex doesn't support 3.3v, an attached molex adatper in the chain will remove it's 3.3v capabilities.

TL/DR: Try a 5 wire SATA cable.
This solved the issue for me! I counted the pins in the PSU SATA cable and it only had 4, so I reconnected to a 5 pin and worked like a charm.
Reply With Quote


  #35  
Old 10-29-2019, 07:30 PM
WookieSM WookieSM is offline
Registered User
WookieSM's PC Specs
 
Join Date: Sep 2014
Location: UK
Posts: 7
POST ID # = 1022668
WookieSM Reputation: 10
Default

Quote:
Originally Posted by jdtechgear View Post
This solved the issue for me! I counted the pins in the PSU SATA cable and it only had 4, so I reconnected to a 5 pin and worked like a charm.
Had the same issue I bought mine last week everything worked except the pump LEDs and I really did not want to strip it back out and send it back i tried everything then read the post above.

I opened my case to fit my new gfx card and low and behold I had 2 sets of 3 SATA power connectors from my PSU one with 4 wires and one with 5.

Plugged a 5 wire into the pump and it now lights up like a Christmas tree

Thank you jdtechgear

Now i have an issue with one of the led fans going off, both come on first boot then the leds on one fan go off within a minute :o

Last edited by WookieSM; 10-30-2019 at 12:44 PM.
Reply With Quote


Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:02 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.