|
|
#106
10-14-2019, 08:56 AM
|
|||
|
|||
Hello for all. I registered in this forum because I am in the process of upgrading my hardware, and by chance I had decided to use as SSD exactly the MP600 (1TB) being discussed in this forum. I admit I am concerned if my unit will work properly, it has not been tested yet because I am still waiting for the new processor to arrive, but I intend to test carefully as soon as my new machine is ready to start and I intend to report the results here for comparison with the results of the others involved.
|
|
#107
10-14-2019, 09:35 AM
|
|||
|
|||
|
Finally Corsair sent my replacement :) But strange thing that again I will get it from Taiwan, dont Corsair have storage in Europe? Now half the World shipping ;( And again from Taiwan as first one (that I purchased from Corsair online store) Im afraid I will get bad one again.
|
|
#108
10-18-2019, 10:42 AM
|
|||
|
|||
|
OK so drive arrived yesterday. Will tell a story :)
As I predicted drive came from Taiwan and same package as I received first one :)    Then I installed windows and wiped whit bios old ssd and rerun tests so the results are now this   Now I dont understand anything..... I think i got purchased another drive LOL because speeds seems good.... Dont understand few things now: Jordan get yellow package and his speeds (4kbit q8t8 almost half better then my but my 4kbit q32t1 score better almost half and drive size he got is 954GIB my standard 931GIB) 
|
|
#109
10-28-2019, 07:50 PM
|
||||
|
||||
|
So, I recently received one unit for the FA RMA and have been running tests. I don't know who the user is on here though.
On my testbench, I'm getting performance that are consistent with what we advertise and the same numbers as the units I already had on hand. This particular unit was accompanied by a screenshot showing the 1000MB/s seq write issue, but on my machine it's fine, which honestly kind of points to it being a combination of variables. I'm still running more tests with different fill % and such, and will share any quirks I've found with system configs. My testbench: ASRock Taichi X570 Ryzen 7 3800X 32GB Dominator Platinum RGB 3200MHz
|
|
#110
10-29-2019, 02:31 PM
|
|||
|
|||
|
Quote:
|
|
#111
10-30-2019, 01:27 AM
|
|||
|
|||
 well here we go again ... it's even worse than the old one (whenever I open a folder it take time showing "working on it" never experienced that with the old drive!)  I think the performance drop based on number of files maybe (because I filled the drive to test it when I got it and there was no drop with performance but once I installed the windows and downloaded BF V and COD MW) last word, I think Kevin did his best, obviously there's no way to get refund so I'm stuck with this drive I will order Samsung 970 evo plus 2tb (wish I did that in the first place but I got greedy and fell down for the advertised speed of Gen 4 nvme)
|
|
#112
10-30-2019, 08:46 PM
|
|||
|
|||
|
Okay, new hardware up and running. I tested my MP600 unit and the result is below:
 At least in my case it seems to be working properly, but note that i turned off any kind of energy saving on the pci-e link just in case (custom power plan)
|
|
#113
11-01-2019, 07:39 AM
|
|||
|
|||
|
Quote:
|
|
#115
11-04-2019, 02:49 PM
|
|||
|
|||
|
Quote:
What's weird is that the new drive worked great for a couple days and now write speed is back down to 1000Mbps... No improvement with the new AGESA 1.0.0.4 update.
|
|
#116
11-05-2019, 12:27 PM
|
|||
|
|||
|
I recently reinstalled Windows. During the installation of my programs, I was continuously testing SSD and it was good. After installing "AI_SUITEIII" with "Dual_intelligent_processor_5" item, and running an automatic CPU tuning, the SSD write speed again dropped to 1 GB/s.
Now I reinstalled Windows and did not install AI_SUITEIII. SSD write speed is good so far.
|
|
#117
11-06-2019, 08:56 AM
|
|||
|
|||
|
I did a little run of CrystalDiskMark on my 2nd drive this morning.
First test: 4200MB/s ! Second test (1 min later): 1000MB/s There is no rhyme or reason for this change in performance... Last edited by matriq; 11-06-2019 at 10:05 AM.
|
|
#118
11-06-2019, 01:40 PM
|
|||
|
|||
|
Quote:
Unfortunately, the slowdown was not caused by AISuiteIII. Writing speed is again completely chaotic Last edited by Istipisti; 11-07-2019 at 12:51 PM.
|
|
#119
11-07-2019, 12:22 PM
|
|||
|
|||
|
Motherboard: ASUS Crosshair VIII Hero (Wi-Fi) BIOS v1001
CPU: Ryzen 9 3900X Memory brand: G.Skill Memory model: Trident Z Neo Memory capacity: 32GB Memory speed: 3600Mhz CL14 Fabric 1:1 BIOS Version: v1001 Windows Build and Version: Windows 10 Pro 1903 MP600 capacity: 1TB MP600 serial number (a photo of the sticker would be great): Don't really wanna share this openly MP600 Firmware Version: EGFM11.2 Using drive as OS or storage? OS Which M.2 slot? First slot Stock heatsink on MP600? Stock I am experiencing 1GB write speeds, more or less spot on with the other posters here. Updated chipset drivers, tested before and after - no difference Tested EGFM11.1 and EGFM11.2 - No difference Power plans - No difference The only thing I can think of doing now before RMA is updating my C8HW to BIOS v1105 which includes the rather significant AM4 combo PI 1.0.0.4 patch B.
|
|
#120
11-07-2019, 02:25 PM
|
|||
|
|||
|
Quote:
|
 |
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Reputation: 10
Linear Mode
