RBG Posted August 5, 2020 Share Posted August 5, 2020 I was hoping someone could give me some info, I have a K95 RGB Plat when I plug in the K/B the caps lock, scroll lock and numlock just flash continously the K/B does work as a standard K/B. No RGB. When I tried to update the firmware in iCUE it gets to 100% then hangs indefinately displaying a red warning symbol in the icon for the K/B Is the keyboard bricked? Any help would be much appreciated. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Notepad Posted August 5, 2020 Corsair Employee Share Posted August 5, 2020 Make sure you didn't accidentally put it in BIOS mode. You can check by pressing the WinLock+F1 down at the same time for about 20 seconds. If it is in BIOS mode the keyboard will come out of it. Link to comment Share on other sites More sharing options...
RBG Posted August 6, 2020 Author Share Posted August 6, 2020 (edited) Make sure you didn't accidentally put it in BIOS mode. You can check by pressing the WinLock+F1 down at the same time for about 20 seconds. If it is in BIOS mode the keyboard will come out of it. Thanks for your response, no change. A few observations and things I tried the K/B only ever appears as a 'Corsair Gaming K95 RGB PLATINUM Bootloader' in device manager on launching iCUE the K95 icon is dispalyed with a yellow symbol bottom right of the icon. On attempting to update the K95 it always gets to 100% never completes the K95 icon changes to a red warning symbol in the bottom right corner. The K/B does not respond unless you unplug and plug in the USB's again. The K/B does not respond on a non UEFI Bios machine until it boots into Win10 (Ver 2004 - 19041.388) I saw there was a thread for the K95 RGB Platinum XT - 'K95 RGB Platinum bricked after iCUE firmware update out of box [02/2020' https://forum.corsair.com/forums/showthread.php?t=194267 I tried the method and firmware in the post and as expected iCUE reconised the K/B as a K95 RGB Platinum XT attempting to update firmware in iCUE yields the same result as with the K95 RGB Platinum firmware. *I reverted to the K95 RGB PLATINUM firmware Any info would be most appreciated as from all the threads I have read the K95 is essentially bricked as a RGB K/B. Edited August 6, 2020 by RBG Link to comment Share on other sites More sharing options...
RBG Posted August 7, 2020 Author Share Posted August 7, 2020 (edited) Could someone dump there working 'K95 RGB Platinum' **NOT ** 'K95 RGB Platinum XT' firmware.bin from there CRP_DISABLED drive? Many thanks it's a frustrating problem Is this valid firmware? https://www3.corsair.com/software/CUE_V3/K95RGBPLATINUM.zip Edited August 7, 2020 by RBG Link to comment Share on other sites More sharing options...
Recommended Posts