EnigMAUS75 Posted February 20, 2020 Share Posted February 20, 2020 Hello everyone! I assembled a PC using a Corsair Carbide 100R case and 5x 120x120x25mm 1800 rpm fans. For a fan label error, however, I mounted the fans in an inverted way compared to what I wanted: DESIRED ORDER: 2 front intake, 2 top exhaust, 1 rear exhaust ORDER OBTAINED (BY ERROR): 2 front exhaust, 2 top intake, 1 rear intake I could obviously fix the problem with a minimum of patience and work, but I was wondering out of curiosity: what negative effect would I have in terms of cooling (especially as regards the CPU, MAINBOARD and SSD)? The system configuration is: Intel i3-8100 CPU with HSF stock RAM Corsair Vengeance LPX (2x8GB) DDR4 SSD Crucial MX500 SATA / 6G (mounted on the top/first zero-tool bracket) MAINBOARD Asus H310M-R R2.0 (a MicroATX budget mainboard with only one passive heatsink on the PCH) I use the integrated video of the CPU and therefore I don't have any discrete PCI Express video card installed. The order of the cables is decent/sufficient. Thanks to those who will give me useful opinions. -- EnigMAUS75 Link to comment Share on other sites More sharing options...
Recommended Posts