AviatoR320 Posted January 11, 2015 Share Posted January 11, 2015 Hi Guys, Just wanted some confirmation whether or not I can setup my H105 in my 760T in a push pull config on the roof of the case. Standard stuff with fans, SP120 push and AF120 for pull. I have a ASUS Hero VII mobo too if that helps! Pictures would be fantastic if you could share......also, any idea where i can get additional fan to radiator mounting screws in Australia? All the other posts seem to relate to US/Canada stores? Cheers from Dunnunda Link to comment Share on other sites More sharing options...
StealthGaming Posted January 12, 2015 Share Posted January 12, 2015 The physical specs of a H105 is 38mm thick vs H100 is 25mm thick. When mounting H105 in top of case you will lose 12mm for fans due to thickness of radiator. Since the 760T and 650D are similar in height I would assume you will only be able to mount dual 120mm fans not a push/pull setup unless you go with thinner radiator. Dual High Static Pressure fans with 3.0 mm/H20 will keep it fairly cool since you have more radiator surface to dissipate the heat. Link to comment Share on other sites More sharing options...
Corsair Employee Corsair Dustin Posted January 12, 2015 Corsair Employee Share Posted January 12, 2015 Yeah, push-pull isn't going to happen with an H105 in the 760T. There's only enough clearance in there for push-pull with a standard thickness radiator like the H100i. Link to comment Share on other sites More sharing options...
AviatoR320 Posted January 13, 2015 Author Share Posted January 13, 2015 Thanks for the replies guys, considering it only decreases temps by approx 2'C I've just saved myself buying 2 more fans. Link to comment Share on other sites More sharing options...
TheRealWitblitz Posted January 22, 2015 Share Posted January 22, 2015 In my case, looks like I have an extra set of SP120's at my disposal :) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.