jeffcomputers Posted September 9, 2019 Share Posted September 9, 2019 (edited) We repair computers and upgrade SSDs. I tried to clone a drive with AOMEI and it did not work. Ghost also has a size complaint. I have a few questions: 1. How do we install drivers for a SSD in Windows 10 before we image? 2. Does the Corsair SSD Toolbox inject drivers for us? 3. Can we inject drivers into a secondary drive that we plug in (like copy it into the driver foldrer? 4. Where can I find drivers for the MP510? All I could find was the toolbox here: https://www.corsair.com/eu/en/Categories/Products/Storage/M-2-SSDs/Force-Series-MP510/p/CSSD-F960GBMP510#tab-downloads My nightmare to clone a SSD continues. I used the Corsair SSD Toolbox, and got this error: [Window Title] Location is not available [Content] E:\ is unavailable. If the location is on this PC, make sure the device or drive is connected or the disc is inserted, and then try again. If the location is on a network, make sure you’re connected to the network or Internet, and then try again. If the location still can’t be found, it might have been moved or deleted. [OK] I tried to re-image. Here is the error: Edited September 12, 2019 by jeffcomputers Link to comment Share on other sites More sharing options...
Recommended Posts