Dirk0minati Posted June 1, 2020 Share Posted June 1, 2020 (edited) This is a problem I've dealt with over a couple of sessions of trying. I have a Corsair iCUE 220T RGB case with 3 front fans w/ RGB. Problem is, they are not working... The fans DO work, the RGB just doesn't. What I did to install: So the the lighting node came pre installed with the 3 fans connected, only thing I needed to do, was to connect the node to my PSU with SATA power and connect the USB to a USB 2.0 header on the motherboard. I connected all the things, but it still doesn't work.. I did also download the iCUE program / Controller. Any help would be appreciated, thanks in advance. Edited June 1, 2020 by Dirk0minati Link to comment Share on other sites More sharing options...
Infin1tum Posted June 2, 2020 Share Posted June 2, 2020 Did you set the correct fan type in iCue? Link to comment Share on other sites More sharing options...
Dirk0minati Posted June 2, 2020 Author Share Posted June 2, 2020 Yeah, I selected the SP120 pro series which should be the correct model. Link to comment Share on other sites More sharing options...
Infin1tum Posted June 2, 2020 Share Posted June 2, 2020 SP120 RGB Pro series fans should be correct, yes. I made the same mistake to use the older SP120 RGB fans before. then please check if - the rgb headers are in the correct ports on the node, they must be in ports 1-3 - check if you have the correct lighting channel selected in iCue - check the fans one by one - if you happen to have gotten a bad fan in the first port, the other 2 won't work as well Link to comment Share on other sites More sharing options...
Recommended Posts