AndrewHaines Posted October 8, 2020 Share Posted October 8, 2020 I have just recently purchased a Corsair Obsidian 1000D Case, and I noticed there is an extra cable near the top in the inside where all the front panel cables come out. As there is not an instruction manual with this case, I have no idea what this is for, could anyone help? Link to comment Share on other sites More sharing options...
DevBiker Posted October 8, 2020 Share Posted October 8, 2020 That cable is to connect additional RGB devices (ideally fan hubs) daisy-chained off of the front panel I/O. As for manual ... check out Zotty's 1000D Build Log - http://forum.corsair.com/v3/showthread.php?t=180073 Link to comment Share on other sites More sharing options...
Zotty Posted October 8, 2020 Share Posted October 8, 2020 (edited) as said... its an RGB channel.. technically it is RGB Channel 1 on your 1000d Commander Pro. but between that cable and the CoPro it has the 18 LEDS in the Front IO and 4 LEDs in the Sails Logo. you can run 4 strips (icue will allow 6 but you will get voltage drop on the last 2 strips making them slightly off color) or you can run an RGB Fan LED hub off of it.. (I run 8 hubs on splitters off that channel for 32 LL fans lol) http://i.imgur.com/hANkZEYl.jpg http://i.imgur.com/Q2bE2bml.jpg note the right hand side of the diagram that shows this connections use... Images are clickable for full res version download Edited October 8, 2020 by Zotty Link to comment Share on other sites More sharing options...
Recommended Posts