robert3892 Posted May 28, 2011 Share Posted May 28, 2011 I have two EVGA GTX 560Ti's in SLI in the Corsair white special edition 600T. The video card in the primary slot is running a bit too hot for my taste. I installed the mesh with two 120mm fans. The two 120 mm fans are in the highest point in the mesh panel with air flow directed into the chassis. The top video card is still running too hot so I have two more 120mm fans to see if this will help, but before I install them I'd like to know if airflow for all four fans should be directed into the chassis or be directed to expel air out of the chassis. Alternatively, would it be logical to have the top two fans blowing cool air into the chassis and the bottom two blowing air out of the chassis? Sort of a push pull scenario. Link to comment Share on other sites More sharing options...
Fan O Water Posted May 29, 2011 Share Posted May 29, 2011 If the graphics cards have little space between them, the top one will run hotter. Based on a picture on Hexus Tv's site, it looks like having two fans on the bottom ought to be enough and definitely aim the air at the gpu's better than at the top. If you decide to put all four on I would try a 4x push setup first. Good luck Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.