ShadowSabre Posted December 3, 2019 Share Posted December 3, 2019 Hi quick question if I wanted to hook up the rgb to my motherboard on my h100i platinum ML120 fans would I use the ARGB/Digital 3 pin header or the regular RGB 4 pin header? Link to comment Share on other sites More sharing options...
DevBiker Posted December 3, 2019 Share Posted December 3, 2019 You'd need to use the ARGB header with an adapter. The adapter is available from a third party and not supported by Corsair ... but it can be had. DO NOT connect it to the 4 pin RGB header on your motherboard. That's a 12V header and it will blow out the LEDs in the fan. Link to comment Share on other sites More sharing options...
ShadowSabre Posted December 3, 2019 Author Share Posted December 3, 2019 Thanks dev I have the adapter on order and it is 3 pin so I figure one fan hub to a header since I have 2 headers on motherboard and have 8 fans Link to comment Share on other sites More sharing options...
DevBiker Posted December 3, 2019 Share Posted December 3, 2019 Yup, that would work. You can use use the Fan Hub splitter if you want 2 matched hubs. Then you have the other header for more RGBz. Link to comment Share on other sites More sharing options...
Recommended Posts