jrwininger Posted November 23, 2019 Share Posted November 23, 2019 I'm using mostly Corsair parts for my new water loop, with the exception of the GPU block, which will be EK. The EK documentation warns that the G1/4 fitting thread length must not exceed 5 mm. Do the corsair fitting fit within this spec? Link to comment Share on other sites More sharing options...
Zone55555 Posted November 23, 2019 Share Posted November 23, 2019 The corsair fittings are rebranded (or mostly, de-branded) bitspower, every one of them. You can check on their specs directly. The few I eyeballed explicitly specified 5mm thread length, e.g. https://shop.bitspower.com/index.php?route=product/product&path=60&product_id=7225 Link to comment Share on other sites More sharing options...
tiborrr Posted November 24, 2019 Share Posted November 24, 2019 They are about 4.5-5mm, depends on how you measure it. These are compatible with the aforementioned GPU block. Link to comment Share on other sites More sharing options...
Recommended Posts