brianfist Posted February 11, 2016 Share Posted February 11, 2016 My Mini Commander and RM1000 are being detected with no problems. I tried switching headers but no go. I did a complete uninstall of CL 3.2 and profiles before installed 4.2 I'm running Windows 10 64 bit. It's not showing up in device manager either. Any ideas? Power cycle not working either. Link to comment Share on other sites More sharing options...
red-ray Posted February 11, 2016 Share Posted February 11, 2016 Has it ever been reported by CL?How is it powered?Have you disabled fan control in the BIOS? Link to comment Share on other sites More sharing options...
brianfist Posted February 11, 2016 Author Share Posted February 11, 2016 Has it ever been reported by CL?How is it powered?Have you disabled fan control in the BIOS? Worked in CL3.2 Pump powered by CPU header and fans are controlled through the unit No fan control or bios settings changed recently I will try rolling back to 3.2 to see what happens Link to comment Share on other sites More sharing options...
red-ray Posted February 12, 2016 Share Posted February 12, 2016 Worked in CL3.2 Pump powered by CPU header and fans are controlled through the unit No fan control or bios settings changed recently I will try rolling back to 3.2 to see what happens If the device is not listed by Device Manager rolling back will not help. Given you have already tried power cycling I suspect there must be some sort of hardware issue. Can you try a mini-USB to USB-A and one of the rear USB ports? I guess you could run my SIV utility and check if [uSB Bus] lists the H100iGTX. If not maybe it's RMA time. Extract siv.zip to C:\Program Files\SIV\ or similar. Link to comment Share on other sites More sharing options...
brianfist Posted February 12, 2016 Author Share Posted February 12, 2016 I pulled the power plug and let it sit for a while and now it's being detected. Kind of weird it happened during the upgrade. Hopefully it's not failing and was just a glitch. Link to comment Share on other sites More sharing options...
red-ray Posted February 12, 2016 Share Posted February 12, 2016 I pulled the power plug and let it sit for a while and now it's being detected. I have seen this work a few times. What I think happens if that the firmware crashes and the device need to be power cycled to get it back. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.