Brotherswing Posted May 1, 2020 Share Posted May 1, 2020 Howdy gang, I have a very common problem, and I think I have a solution but I'd like to run it by those who would know. My set up has quite a bit of RGB goodness, but not very much of it coordinates. My overall goal is to control as much as possible with iCue. The case has three 120 ARGB fans and two LED strips integrated into the base. All of them are run by an RGB hub controlled by a hardware switch in the case. I already have a CoPro, so my thought process is as follows... Can I get a Lighting Node Pro, replace my existing RGB hub with it, then change the connectors on the fans and strips to then connect them to the rest? I am comfortable with modding connectors, I just wanted to know if it's even a valid plan before I go changing anything around. What do you guys think? Link to comment Share on other sites More sharing options...
Brotherswing Posted May 3, 2020 Author Share Posted May 3, 2020 I solved my own problem. The only way to keep the different lights from clashing is to turn them off. Link to comment Share on other sites More sharing options...
Recommended Posts