The Corsair User Forums  

Go Back   The Corsair User Forums > Corsair Product Discussion > Cooling

Thread Tools Search this Thread Rate Thread Display Modes
Old 11-23-2018, 10:31 AM
ewpiw ewpiw is offline
Registered User
ewpiw's PC Specs
Join Date: Nov 2018
Posts: 1
POST ID # = 981701
ewpiw Reputation: 10
Default H150i PRO not detected (by anything)

Hi All

Just updated the board and now nothing is detected from the cooling system. There is light on the block, but I can't tell if the pump is working or not, the fans are not. I'm using the original connectors that came with the system and it did work on the previous board(asus z97-c).

M Board:ROG Z390-F

Reinstall/try different versions of Link, iCUE, BIOS -> none can detect the cooler

Change SATA power to different plug-in and line. Swapped with hard drive.

Manually changed the driver and we went from not detected to:
This device cannot start. (Code 10)
A USB port reset request failed.

Changed the USB slots on the motherboard

BIOS: no fast boot, XHCI hand-eff enabled, legacy USB support enabled

tested with external usb drive, no effect so it's not the usb cable.

But now I'm clueless how to continue, any help is appreciated.

Last edited by ewpiw; 11-24-2018 at 05:25 AM.
Reply With Quote

Old 11-26-2018, 02:02 PM
Corsair Jam's Avatar
Corsair Jam Corsair Jam is offline
Corsair Employee
Join Date: Aug 2018
Posts: 216
POST ID # = 982193
Corsair Jam Reputation: 17


With the change of board, have you installed the latest drivers from your motherboard's website? Have you ran an "SFC /scannow" to make sure the OS looks good? I would first advise checking for the latest USB and chipset drivers for your board and making sure it's up-to-date.
Reply With Quote

Old 11-27-2018, 10:35 AM
GWNewman1 GWNewman1 is offline
Registered User
GWNewman1's PC Specs
Join Date: Aug 2018
Posts: 14
POST ID # = 982333
GWNewman1 Reputation: 10

Also of note - I went from a Strix X470-F to a Crosshair VII Hero and had the same problem, couldn't control the lights on the pump and it wasn't detected by iCue. Make sure the USB header you're using on the board is a 2 port USB connector - on my Crosshair, one of the headers only supports one port due to it sharing the connector with the ROG extension header. I wound up putting in a NZXT internal hub.
Reply With Quote


h150i pro, not detected

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -4. The time now is 07:45 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.