Jump to content
Corsair Community

Corsair Link Software Update Version 4.9.9.3


Technobeard

Recommended Posts

  • Administrators

Join the v4.9.9.3 discussion

 

Supported Hardware:

  • Hydro Series - H80i, H100i, H80i GT, H100i GTX, H110i GT, H110i GTX, H80i V2, H100i V2, H110i, H115i
  • PSU Series - AXi, HXi, RMi, RM (With USB Dongle)
  • Commander MINI, cooling node, and lighting node
  • Lighting Node PRO (added in v4.5.0.55)
  • Full single-color Vengeance DRAM support (including synced pulse) for Z170/Z270 (added in v4.6.0.86)
  • Vengeance LED/RGB DRAM supported on these chipsets: Intel X99, Z170, 200 Series, Z370; AMD 300 Series
  • Commander PRO supported

 

 

1/28/2019 - Corsair Link Software Update Version 4.9.9.3

 

Release note:

  • Maintenance release to fix security bug.

 

 

4/17/2018 - Corsair Link Software Update Version 4.9.7.35

 

Changelog:

  • No new features.

 

Bug Fixes:

  • Improved stability with AMD graphics cards and motherboards.
  • Text for Commander Mini, Lighting Node, and Cooling Node on home screen fixed.
  • Vengeance RGB DRAM tile now appears for ASUS TUF X299 Mark 2 and ASUS Maximus VIII HERO motherboards..
  • CPU core numbering has been fixed.
  • Mechanical hard disks are no longer tracked by LINK, allowing them to enter sleep state.
     

 

Known Issues:

  • Dashboard sometimes loads blank or becomes blank. (To be fixed in next release.)
  • EVGA Precision XOC software may conflict with Corsair LINK. Please update to the most recent version of EVGA Precision XOC to resolve this issue.
  • LL RGB fans will require the Corsair LINK software to function. This is a limitation of the Lighting Node PRO and Commander PRO hardware.
  • CPUs with more than 16 cores will not report all cores. This is a limitation of Corsair LINK being a 32-bit application.

 

 

3/21/2018 - Corsair Link Software Update Version 4.9.6.19

 

Changelog:

  • No new features.

 

Bug Fixes:

  • Resolved connection issues with some coolers.
  • Improved stability with AMD graphics cards and motherboards.
  • Resolved issues where H115i PRO and H150i PRO might have difficulty updating firmware.
  • Extra fans will no longer show up under motherboard information after LINK has been running for an extended period of time.
  • CPU core numbering has been fixed.

 

Known Issues:

  • Mechanical hard disks may not enter sleep state. (Scheduled for next release.)
  • Link may still have stability issues with some AMD graphics configurations. (Scheduled for next release.)
  • Dashboard sometimes loads blank or becomes blank. (Investigation ongoing.)
  • EVGA Precision XOC software may conflict with Corsair LINK. This is due to their software trying to take control of certain Corsair coolers. We are in process of resolving this with EVGA.
  • LL RGB fans will require the Corsair LINK software to function. This is a limitation of the Lighting Node PRO and Commander PRO hardware.
  • CPUs with more than 16 cores will not report all cores. This is a limitation of Corsair LINK being a 32-bit application.

 

 

2/12/2018 - Corsair Link Software Update Version 4.9.5.25

 

Changelog:

  • No new features.

 

Bug Fixes:

  • LINK no longer shows an extra AMD GPU.
  • Updating Lighting Node PRO when daisy-chained to Commander PRO on AMD X399 no longer results in failure.
  • Changing profiles now changes DRAM lighting mode.
  • LINK stability issues on systems with AMD hardware have been mitigated.

 

Known Issues:


  • Some users are reporting disconnection issues with H115i PRO and H150i PRO coolers. (Fix scheduled for next release.)
  • X370 and X399-based systems may still have stability issues. (Fix ongoing.)
  • CPU core numbering may not report correctly for some users. (Fix ongoing.)
  • Extra fans may appear under motherboard info after LINK is left running over an extended period of time. (Fix ongoing.)
  • Mechanical hard disks may not enter sleep state. (Workaround scheduled for next release.)
  • LL RGB fans will require the Corsair LINK software to function. This is a limitation of the Lighting Node PRO and Commander PRO hardware.
  • CPUs with more than 16 cores will not report all cores. This is a limitation of Corsair LINK being a 32-bit application.

 

 

12/22/2017 - Corsair Link Software Update Version 4.9.4.28

 

Changelog:

  • Hardware playback restored for SP RGB fans, HD RGB fans, ML RGB fans, and RGB strips.

 

Bug Fixes:

  • Fixed situations where leaving Corsair LINK running for 3+ days will result in high CPU usage.

 

Known Issues:

  • Users connecting Lighting Node PRO or AXi USB dongle to Commander PRO USB hub may experience detection issues if Commander PRO is connected to an AMD chipset or ASMedia USB controller. (Fix ongoing.)
  • CPU core numbering may not report correctly for some users. (Fix ongoing.)
  • Extra fans may appear under motherboard info after Link is left running over an extended period of time. (Fix ongoing.)
  • Systems with AMD graphics cards may report one extra graphics card. (Fix ongoing.)
  • Mechanical hard disks may not enter sleep state. (Fix ongoing.)
  • Changing profiles does not change DRAM lighting. (Scheduled to be fixed in next release.)
  • LL RGB fans will require the Corsair LINK software to function. This is a limitation of the Lighting Node PRO and Commander PRO hardware.
  • CPUs with more than 16 cores will not report all cores. This is a limitation of Corsair LINK being a 32-bit application.

 

 

12/08/2017 - Corsair Link Software Update Version 4.9.3.25

 

Bug Fixes:

  • “Copy To” no longer produces error message in systems with Commander PRO and Lighting Node PRO installed.
  • Corsair LINK starts minimized.

 

Known Issues:

  • Users connecting Lighting Node PRO or AXi USB dongle to Commander PRO USB hub may experience detection issues if Commander PRO is connected to an AMD chipset or ASMedia USB controller.
  • Hardware playback no longer available for SP RGB fans, HD RGB fans, and RGB PRO lighting strips.
  • CPU core numbering may not report correctly for some users.
  • Extra fans may appear under motherboard info after Link is left running over an extended period of time.
  • Systems with AMD graphics cards may report one extra graphics card.
  • Mechanical hard disks may not enter sleep state.
  • CPUs with more than 16 cores will not report all cores. This is a limitation of Corsair LINK being a 32-bit application.

 

 

11/15/2017 - Corsair Link Software Update Version 4.9.2.27

 

Changelog:

  • Support for ML RGB fans.
  • Support for Vengeance LED and RGB DRAM on Intel non-Z 200 Series chipsets and AMD A320 chipset.
  • Added manual configuration of fans for Commander PRO (PWM/DC/Auto/Off).

 

Bug Fixes:

  • 0 RPM dip at fan speeds multiples of 256 RPM on Commander PRO no longer occurs.
  • Corsair LINK no longer requires administrator rights to run.

 

Known Issues:

  • Updating Lighting Node PRO firmware will fail on AMD-based systems if Lighting Node PRO is connected to Commander PRO USB hub.
  • Hardware playback no longer available for SP RGB fans, HD RGB fans, and RGB PRO lighting strips. (Fix scheduled for next release.)
  • CPU core numbering is off.
  • Extra fans appear under motherboard info after Link is left running over an extended period of time.

 

 

10/25/2017 - Corsair Link Software Update Version 4.9.1.23

 

Changelog:

  • Support for Vengeance LED and RGB DRAM on Intel Z370 chipset.

 

Bug Fixes:

  • Intermittent “driver unsigned” issue when installing Corsair Link is fixed.

 

Known Issues:

  • Custom fan curves may experience dip to 0 RPM. (Fix scheduled for upcoming firmware release for Commander PRO.)
  • Vengeance LED/RGB DRAM is not recognized on motherboards with Intel non-Z or X chipsets. (Fix scheduled for next release.)
  • Updating Lighting Node PRO firmware will fail on AMD-based systems if Lighting Node PRO is connected to Commander PRO USB hub.
  • Hardware playback no longer available for SP RGB fans, HD RGB fans, and RGB PRO lighting strips. (Fix scheduled before end of year.)

 

 

09/26/2017 - Corsair Link Software Update Version 4.9.0.57

 

Changelog:

  • Support for software-driven lighting effects on RGB products added.
  • Support for upcoming RGB-enabled products.
  • Support for Vengeance LED and RGB DRAM on AMD X399 chipset.
  • Fine adjustment of custom fan curves using arrow keys.
  • Manual firmware update from local files.
  • Minor UI fixes/improvements.

 

Bug Fixes:

  • AMD Ryzen processors now show the correct temperature.

 

Known Issues:

  • Some users may experience intermittent “driver unsigned” issue when installing Corsair Link.
  • Custom fan curves may experience dip to 0 RPM.
  • Vengeance LED/RGB DRAM is not recognized on motherboards with Intel non-Z or X chipsets.
  • Updating Lighting Node PRO firmware will fail on AMD-based systems if Lighting Node PRO is connected to Commander PRO USB hub

 

 

09/15/2017 - Corsair Link Software Update Version 4.8.3.8

 

Changelog:

  • Conflict between CUE and CORSAIR LINK software is fixed.
  • Intermittent shutdown for systems with AX1500i is fixed.

 

Known Issues:

  • Some users may experience intermittent “driver unsigned” issue when installing Corsair Link.
  • Custom fan curves may experience dip to 0 RPM.
  • Vengeance RGB DRAM may not be recognized on some motherboards with the B250 chipset.
  • AMD Ryzen processors show temperature 20C above actual.

 

 

08/23/2017 - Corsair Link Software Update Version 4.8.2.1

 

Changelog:

  • Added support for Intel X299 platform.
  • Fixed intermittent issue where CL would only identify 3 out of 4 DIMMs.
  • Compatibility update for future firmware updates of Lighting Node PRO and Commander PRO.

 

 

07/17/2017 - Corsair Link Software Update Version 4.8.0.82

 

Changelog:

  • UI Update: Added "-" button to Commander PRO and Lighting Node PRO LED configuration screen for easily removing strips/fans.
  • Fixed high CPU and I/O usage reported on some systems.
  • Fixed UI scaling issue on 4K displays.
  • Fixed color effect synchronization between Link software and LED DRAM.
  • Fixed Vengeance RGB control on ASUS Strix Z270I Gaming.

 

 

05/16/2017 - Corsair Link Software Update Version 4.7.0.77

 

Changelog:


  •  
  • AMD Polaris GPUs now properly reported
  • New CPUID SDK backend update for AMD Ryzen support
    • Ryzen support for CPU/MB information
    • Ryzen support for LED DRAM control (Both RGB and Single Color)

     

    [*]Added additional HD fan effects to Lighting Node PRO (Sequential, Marquee, Strobing/Blink, Visor)

    • Included in Firmware update for Lighting Node PRO

     

    [*]Added Rainbow effect for SP fans on Lighting Node PRO

    • Included in Firmware update for Lighting Node PRO

     

    [*]Addressed LED DRAM lighting control for 4-slot X99 systems

    [*]Addressed a specific instance with Lighting Node PRO and some HD Series fans being unresponsive after firmware update

    • Included in Firmware update for Lighting Node PRO

     

 

 

03/20/2017 - Corsair Link Software Update Version 4.6.0.86

 

Changelog:

  • Full single-color Vengeance DRAM support (including synced pulse) for Z170/Z270
  • Full Vengeance RGB DRAM support for Z170/Z270
  • X99 support for both items above (Beta)
  • DRAM Timings shown in UI
  • DRAM Part number shown for UI
  • SP RGB Fan support for Lighting Node PRO
  • Addressed issue with H110i that may run pump at lower RPM until software startup
  • Kabylake CPU support

 

 

02/10/2017 - Corsair Link Software Update Version 4.5.0.55

 

Changelog:

  • Added support for Lighting Node PRO
  • Added new product support for the CORSAIR Lighting Node PRO
  • Added Mimic color animation - display animation for selected lighting effect in the user interface
  • Fixed Vengeance LED modules when only one unit was controlled (Z170/Z270 motherboards only)
  • Condensed DRAM layout to display modules with the same SPD in one section.
  • Performance and stability improvements, minor bug fixes

 

 

09/14/2016 - Corsair Link Software Update Version 4.3.0.154

 

Changelog:

  • Added option copy settings between similar devices (One fan to another fan, LED Lighting, etc.)
  • Option for application now to update automatically added
  • Added custom curve option for PSU Fans
  • AXi Series PSU show more accurate power values at lower loads
  • Added BETA support for Vengeance LED memory modules. Z170 Platforms ONLY
    • Change from Default lighting (Pulsing) to static
    • When “static” is selected brightness can be configured
    • Brightness allows the dimming of the LED on the memory modules, including turning the LED off completely

    [*]Now graph window is able to remain open after minimizing main window

    [*]Add new skin without hex pattern background

 

 

07/20/2016 - Corsair Link Software Update Version 4.2.4.25

 

Changelog:

  • Addressed instances where the DRAM modules were not updating temperature readouts in UI
  • Addressed issue with DPC Latency
  • HXi and RMi PSU Multi-Rail mode terminology update
  • Resolved several device connection issues
  • Updated EULA
  • Fixed interlocking of access to Corsair devices for third-party applications
  • Some visual improvements of charts

 

 

05/11/2016 - Corsair Link Software Update Version 4.2.3.41

 

Changelog:

  • All fans and pumps (including GPU and MB) are added to Configure tab.
  • Added option to disable debug logs and to change their destination.
  • Added PSU Calculated Efficiency to PSU advanced view. PSU power, current and voltage are now added to charts.
  • Added device indexes for systems using 2 or more Commander mini, Cooling node, Lighting node.
  • Addressed instances where the HDD/SSD were not updating temperature readouts in UI.
  • Addressed instances with H80i, H100i, and H110i GT liquid coolers showing incorrect colors after cold boot.
  • Resolved several stability and performance issues.

 

 

03/31/2016 - Corsair Link Software Update Version 4.2.2.27

 

Changelog:

  • CPU usage issue on some systems has been addressed.
  • Revised the method of checking for prior versions of the software (v3) during the install process.
  • Addressed certain connection issues between the H80i & H100i and Commander Mini.
  • OCP settings on AX1200i are disabled by default now.
  • Port used by software is changed to 10801 to avoid conflicts with other SW.
  • Stability improvement (fixes of some crash situations).
  • Resolved issue where SMART temperatures from some SSD’s resolved to showed incorrect data.

 

 

03/07/2016 - Corsair Link Software Update Version 4.2.1.42

 

Changelog:

  • Detection of AX1500i when it's connected directly to USB port
  • Put window to any screen on multi-screen systems
  • Re-applying settings when computer wakes up from Hibernate or after Fast Startup
  • Resolve issue with some systems that show only part of onboard sensors

 

 

01/26/2016 - Corsair Link Software Update Version 4.2.0.162

 

Changelog:

  • First Public Release for v4!

Edited by Technobeard
Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...