View Single Post
  #6  
Old 11-11-2019, 06:07 PM
c-attack c-attack is offline
Registered User
c-attack's PC Specs
 
Join Date: Jun 2014
Posts: 10,023
POST ID # = 1023667
c-attack c-attack Reputation: 107
Default

You can always ask more questions here. Also, we all have the same issue with the 6 fans and Commander Pro + Hydro X Pump. If you have a custom loop, you probably have more than 5 fans. I run my 6 LL120 + pump the same way with one splitter.

I'll throw this out now because it will come up later... when you first boot up the OS and then later install iCUE for control, go to the Settings (top bar of app), then click on the Commander Pro. You will see a selector of Auto/3 pin (DC)/4 pin (PWM). You must set the #6 an header (or whichever is connected to the pump) to 4 pin in order for it to be detected. Auto will not work. While there, set them all to 4 pin for the LL. When on Auto, the fan controller will do a fan test on every boot up. You may recognize that as the 'fan blast' you hear when powering on. That isn't necessary for PWM fans and when set to 4 pin they will start at their assigned speeds.
Reply With Quote