Goudada

Instructions sent to me by corsair for my Corsair Schmitar Pro RGB Model Code: CH-9304111 Note: I will not be held responsible if you further break your device by installing this firmware on the wrong mouse or you fail to follow the instructions below. Firmware File: https://drive.google.com/file/d/1hwXXJuKcc9vAOrQeU9WDhfp0L-ysSxWN/view?usp=sharing 1: Unplug your mouse from the computer. 2: Locate the small pinhole underneath your mouse. For some, this will be located directly on the bottom in plain sight. On others, it will be located underneath one of the removable weights attached to the bottom of the mouse. 3: Using a small paperclip or push-pin, press down on the button inside the pinhole. 4: Plug your mouse back into the computer, while holding down the pinhole button. 5: Once it is plugged back in, your computer should recognize a drive called CRP_Disabled. Please open this. 6: Download the firmware file from the ticket. If it is compressed into a .RAR file, please extract this file to an easily found location on the computer. 7: Delete the file FIRMWARE.BIN from the CRP_DISABLED drive, and then place the file with ISP in it’s name to the CRP_Disabled drive. 8: Once you have performed the steps above, please unplug your mouse and then plug it back in. The device will then return to normal. Please test to see if the issue reappears. If it does, please inform us on the ticket for further troubleshooting. Edit: attached zipped file to post. ScimitarPro_ISP_v110.zip