Jump to content

elric75

Members
  • Posts

    149
  • Joined

Reputation

10 Good
  1. Hi there, i have a weird coil whine issue in my rig and maybe someone will be able to help. [ame]https://youtu.be/C7LMtKLezEI[/ame] I had read that this kind of coil whine is not dangerous for the devices , whether it is the power supply or the graphics card, could you confirm it to me. What is weird is that the noise occurs at + 30FPS +, i've limited FPS to find out it does not occurs only at high fps as i was used to with coil whining GPU... I try to play with the sliders of MSI afterburner and I can hear that the sound changes . After that I only hear it if the fans are at their lowest and the panel is open so if it is certain that it cannot harm my configuration, it is not very serious but I would like to be sure. However I would like to understand because the problem arises with: 2 different graphics cards (EVGA FTW3 2080ti and Asus Strix 2080ti Oc that someone gave me for test purposes). The two cards do not make this noise in another config 2 power supplies of the same model (Seasonic Ultra Prime titanium 850w) 2 motherboards of the same model. Asus Maximus Hero XI Cstate on and off Mod cable cables or original cable it's driving me crazy. Seasonic sent me some "ferrite" cables, didn't got it yet but i'm thinking of going for a Corsair HX850 which isn't seasonic based for what I know, not like the AX ones? Would appreciate some help. Thanks !
  2. I have the motherboard showing up in Icue but it seems I can't control anything. All is on the same color and it does not seem to do anything when I change it. Where did I go wrong? Also, with some ARGB Halos and neon strip, is there a way with Icue to control the leds independently? In aura it seems impossible
  3. Hi, I've tried to put corsair service on manual but the service keeps coming back. I have corsair.service (32 bits) Corsair.service.cpuldRemote Corsair.service.displayadapter (32 bits) I will soon change lots of things in my rig and the only corsair product I will have is my keyboard, I only need Icue to change the Rgb on it. Could I set up a hardware profile and delete all Icue? Thanks
  4. You mean the fan curves will apply even without Icue running? I just set up a hardware lightning for my keyboard, i just use red and purple static with no effects but seems it's not possible to have two different colors on LL120 with hardware profile, that's too bad. I would have loved to keep one color in the center and another around but apprently we can't. I really try to limit Icue usage, it's getting worse in CPU and GPU ressources !
  5. Hi, I don't really understand why my coolant temps is at 35c on my H150i, it's not as warm as yesterday and i am just on windows. Cpu is idling at around 40c.. it's quite warm today but still 34 to 35c coolant temps, even when gaming, it's not that usual for me Also, i notice that Icue is less hungry on cpu ressources when hidden but it seems to use up to 10% of GPU processor and I really don't understand why, even minimized. And up to 15 to 20% when displayed. is that normal? thanks
  6. Hi i have some questions before purchasing the wrong item :) I would like to: Be able to plug my two 200 argb fans from my h500m case on the lighting hub and I'm looking for an adapter What kind of splitter would I need to plug the rgb of those? Right now I have one commander one fan led hub and i dont want to add other devices if possible. I saw those, would that fix my issue?. https://www.ebay.fr/itm/Corsair-RGB-to-JST-SM-Addressable-RGB-Adapter/372551535271?var=641330262522 but there are two variant on those? https://www.ebay.fr/itm/Corsair-RGB-Lighting-Channel-Splitter/372687733173 Could I use this to plug my two fans on the the same plug too. I already have one https://www.coolermaster.com/catalog/coolers/rgb-accessories/argb-1-to-3-splitter-cable/ I kinda lack the logic skills to think this ahead and will appreciate some guidance On another hand : Also i might change my case and I will miss one slot for rgb fan I might have 10 rgb fans to power, what would be the right cables to use? Thanks!
  7. hi, I have icue eating up to 6 % cpu, its going from 6 to 1% again and again and 200MO or ram. Is there any way to fix that? My temps is fluctuating because of it and it's really annoying. Could it be RGB related? Thanks
  8. Hi, Is it normal that Icue eats that much of memory? Thanks https://www.casimages.com/i/200602032758160436.png.html I have 3LL 120 on my AIO 1 ll 14On on the case h150i K70 mk2 keyboard one led strip
  9. I hear this weird noise in my case it seems they its coming from the h150i aio pump but not sure. I can hear it in all of the three speed of the pump, feels like it's another sound that the usual one depending on the speed. Could it be something else? I have put all the fan at low speed and the pump was on silent mode for the video Thanks [ame]https://youtu.be/PY6ZwZjrq1o[/ame]
  10. I usually run balanced indeed i don"t see much difference with extreme. Just wanted to be sure all is ok . There is another weird buzzing noise but feels likes it is coming from the LL120 fans
  11. Hello, Are those noise "normal" for this pump? Silence : [ame]https://www.youtube.com/watch?v=x6N4KzeqYzE[/ame] Balanced : [ame]https://www.youtube.com/watch?v=dMjSzNslZpo[/ame] Extreme : [ame]https://www.youtube.com/watch?v=p08kkEafeZ8[/ame] Thanks !
  12. Oh OK the 280 fans will be more quiet indeed? nd what about the new xt one? I find the pump of my h150i pro quite noisy actually
  13. Hi, Is there a lot of performance difference between those AIO? I read on few tests that the H115i was performing better actually ! Thanks
  14. I have an aorus board not asus I did some occt and I had lots of errors below 1.325, or blue screen. I am not at 1.38 I have a offset it never goes above 1.32 Llc is on high which is 5 for asus but I'm not even sure it's 100% stable because I had it on turbo when I did my stress tests. I'm quite sure my chip is far from golden... But so those temps are fine even if they go on average around 40 (that's if I lower the fans) I've set up Ia dc as well
  15. Well it does feel the temps are lower on a constant base with fans higher speed but I also put the pump on extreme maybe that helps to prevent spikes? I do have all c state enabled too. I've set up an Oc on my 8086k this week at 5ghz with adaptive vcore with those settings on an aorus master mB. Maybe you'll could find out if something feels wrong? Thanks :) ADAPTIVE PROFILE ADAPTIVE PROFILE 5GHZ ADVANCED FREQUENCY SETTINGS CPU Base clock 100 CPU upgrade : auto Enhanced multi core performance disabled CPUclock ratio 50 FCLK frequency for early power on : 1Ghz XMP : profile 1 Vt-d disabled Turbo boost disabled IA AC/DC at 1 Advanced cpu core settings AVX offset : 0 Uncore ratio : 45 Intel turbo boost technology : off Cores : 50 all cores C state : enabled SpeedShift : enabled ADVANCED VOLTAGE SETTINGS Advanced power settings CPU internal AC/ DC Load Lines : auto CPU VCORELoadline calibration turbo CPU core voltage control Manual CPU vcore : auto (1.380 at load)/ offset -0.05 VCCIO 1.10 CPU SA : 1.10 CPU current limit 255 Power maxed out Cpu vcore PWM switch rate : 300
×
×
  • Create New...