Jump to content

Srs1994

Members
  • Posts

    14
  • Joined

Reputation

10 Good

About Srs1994

  • Birthday 04/04/1994
  1. there are 4 fans controlled by the msi dragon center. the other two fans are the cooler fans. And I can't change the speed, yes I mark them after selecting the profile.
  2. Hello people, I will try to be brief and direct in my problem. I basically can't change the rpm of my fans. It has to change to balanced or extreme and nothing happens. Already tried: -Renice Icue -Uninstall Icue -Remove the cooler cable -Uninstall HwInfo -I forced firmaware. -Msi z390 pro carbon -Coller Corsair H100i SE -Fans LL120 and HD120. Programs used at the same time: -Razer synapse -Msi afterburner -Dragon center If you need more information I will provide what you need.
  3. By the way, their color seems a little faint, is there a possibility that this will happen or is it normal for them?
  4. Thank you, now i understand the problem.
  5. I have a set of fans on my PC 3 LL series and 3 HD120, they are all connected on the same hub. In the icue configuration I defined it as 6 LL's, everything works. However I have a problem, I created an effect with 3 channels of arc effect, they work well, but when I restart the pc the effects change to 1 channel, the effect is incomplete. They only work again if I click on them. I will leave a photo with the effects I am trying to use. https://prnt.sc/t64r5g
  6. I leave here an image of the cooler to disconnect https://prnt.sc/spmtq9
  7. as I can't edit the topic, I meant that the cooler is disconnecting and connecting every 10 seconds. I hope it helps
  8. Hi, I come here to show my problem with my h100i platinium. First of all, I want to inform you that I have already researched and tried solutions to all the topics created about this problem. Basically the ICue does not detect the H100i, everything works, the cooler fans work just like the RGB. I believe that something is in conflict with it, because on devices it is '' blinking '' slowly. Already tried: - Use another cable to connect to the outside. - Uninstall Icue and install. - Disable CorsairLink on HwInfo - Disconnect all cables from the cooler and reconnect. - Uninstall all rgb controller software. - Check if it appears in usbdeview (yes). - Restart pc. - More things I already forgot ... I am sorry for creating another topic, but I have had very bad experiences with corsair. :louco:
  9. update: This is happen when i play the game call of duty, when i leave game, this back to normal.
  10. hello devbiker, he is on 6, if I put him on the first, he will block the effects on the remaining fans, I put him on 6 because of this problem.
  11. I am creating this topic because I have a problem with my hd120 fan. In my box I have 4 hd120 fans, and 3 of them are working perfectly, only one has a problem, the problem is that the rgb effect remains stopped, only one led / pin changes the effect. I will leave a video to help you understand my problem. I believe it is some software conflict. I already tested: -I already tested to put only the fan with problem on, but the problem remains. -firmware update. - Reinstall Icue. -I changed from automatic to manual in corsair services. Off: I take the opportunity to ask for information, I want to connect my RGB strips on the motherboard, but I don't have internal USB available, is there any Y cable to be able to connect 2 in 1? If so, what do they recommend? [ame] [/ame]
×
×
  • Create New...