Jump to content

matriq

Members
  • Posts

    19
  • Joined

Reputation

10 Good
  1. Yes I tried the latest AGESA 1.0.0.4 update for my Aorus Elite and no improvements.
  2. Write speeds are still problematic with my replacement drive (with yellow packaging).
  3. I did a little run of CrystalDiskMark on my 2nd drive this morning. First test: 4200MB/s ! Second test (1 min later): 1000MB/s There is no rhyme or reason for this change in performance...
  4. Did not work. What's weird is that the new drive worked great for a couple days and now write speed is back down to 1000Mbps... No improvement with the new AGESA 1.0.0.4 update.
  5. Everything is working great with my new MP600 and the old one is in transit to Corsair right now. I used DISM to clone the drives so I'm pretty sure the problem is not software related. One moment the speed in CrystalDiskMark was normal and 15 minutes later write speed was back down to 1000MB/s (without any reboot or work being done by the PC). Same thing with 25% fill or 80% fill...
  6. I confirm that anytime free space is less than 60% of 930Gb the write speed slows down. If you want all the performance don't write more than 372Gb on the drive. I hope Corsair will fix this in a futur firmware update...
  7. I just checked and no new firmware with Toolbox 1.2.5.7. Still firmware 11.1
  8. blkstar73 in post #12 ran it as storage drive and write speed was not better.
  9. I clicked the "i" button in SSD Toolbox and use the "Check for updates" feature.
  10. I updated SSD Toobox to 1.2.5.7 but no new firmware available.
×
×
  • Create New...