Jump to content

ozzpoz

Members
  • Posts

    12
  • Joined

Reputation

10 Good
  1. Gigabyte 2070 super. 👍
  2. Can anyone help me out with icue. It's worked flawlessly for months. I only have one profile, Lighting link green. It works fans, cooler , ram and a Asus mobo. I set my GPU separately with fusion. Problem started last week when all fans would randomly switch to rainbow wave, which I think is a default setting. If I open the icue software it all changes back to green but Ram shows a warning triangle and I can't select it until I force a ram update. ( Which doesn't actually update but runs through the process ). Then everything is normal till it decides to do it again. Also when it happens sometimes the mobo also goes into a rainbow wave. Probably happens 2-3 times aday. I uninstalled / reinstalled icue and Aura sync. Everything seemed fixed and was working. Till I turned off the pc. Now icue doesn't fire up on startup. All lights seem random till I manually open the icue software then all the lights switch to my profile. I close the software and after a while it goes random again. I've checked in start up apps and in icue settings and it's set to run on start up. This all seems to of started after the last update. Any help appreciated. Thanks.
  3. Hi. I can't help I'm afraid but I'm hoping you can help me. Did you find the problem as mine has just started to do the same thing. I've tried everything I can think of. It's so annoying.
  4. Hi. I've had a look tonight, . My Rad is 25mm wide and specs list my GPU is 286.5mm.. so that's 311.5mm . If you include the small gap in-between my rad and GPU that makes the max about 313mm. I can't get in fully with a rule or tape to measure the space but it does look less than my specs say. And without taking my GPU out to see if the sizes in the specs are correct I couldn't guarantee your GPU would fit. To be on the safe side of things I'd probably stay under the listed 300mm max. Sorry I can't be more help.
  5. Hi. Without the radiator you'll gain enough room. I can double check when I get home this evening what the max length is without a rad. . When I emailed Corsair about the max GPU length they said the 300mm max was with a radiator installed. Although I think it's a bit smaller than that unless my rad is thicker than some others.
  6. Hi. I used the gigabyte 2070 super which is 286.5mm, and it only just fit. I wouldn't go any bigger than that. The 2080 at 290mm will touch the rad. . You could put the rad on the top, but that would depend on the motherboard and ram your using. Hope that helps.
  7. for anyone interested, the GPU fit, just, but i think it looks good, works well and temps are all very low .
  8. I've just had a build completed using the 220t with the Corsair AiO at the front. The GPU was a 2070 super 287.5mm long and it fit ok with a bit of room to spare. I'm not sure how wide the AiO is but if your not using one then that might give you the extra space.
  9. Hi. If your using this case, could you do me a favour and measure the max GPU length if an AiO was at the front. It would be appreciated. Thank you.
  10. I posted yesterday after some advise on this case. I hadn't seen this thread. If it's ok. I'll copy my concerns in and maybe you guys using the case already can help me out. Thanks. I'm planning on a build using the Corsair icue 220t , Corsair vengeance pro rgb RAM and a hydro H100i 240 AiO, Asus Rog strix B540 gaming F motherboard. I'm also using a gigabyte 2070 super which is 286.5mm long. Can you confirm if there is enough clearance to fit the AiO either at the front or the top. I obviously don't want it hitting the GPU or RAM. If not could you tell me what the max GPU length is with a AiO is fitted. Or alternative mounting or components for example would the hydro 120mm fit on the back. Or just forget about a AiO and use the stock prism . Thank you.
  11. Hi. I'm looking for a bit of advise , I'm planning on a build using the Corsair icue 220t , Corsair vengeance pro rgb RAM and a hydro H100i 240 AiO, Asus Rog strix B540 gaming F motherboard. I'm also using a gigabyte 2070 super which is 286.5mm long. Can you confirm if there is enough clearance to fit the AiO either at the front or the top. I obviously don't want it hitting the GPU or RAM. If not could you tell me what the max GPU length is with a AiO is fitted. Or alternative mounting or components for example would the hydro 120mm fit on the back. Or just forget about a AiO and use the stock prism . Thank you.
×
×
  • Create New...