Kostas19901

So I did I made the connections again from the beginning and the fans stay white only one- two less of them blink in other color and the strips are not working only 2 of them.

Thanks mate! I’ve them this way and still the same😭😭😭. In 2-3 days I’ll dismantle the case to clean it and I’ll check the connection again for the 4th time since I built it. I suspect that it is beachside of ML and LL fans. So I’ll try to connect both ML fans to the AIO and after that I’ll see what happens. I don’t remember but I think that AIO has an rgb header.

Here you go!:laughing:exp.zip

Hi guys I have a Corsair 280x rgb with 2 LL fans, 2 ML fans, h115i RGB, 4 led strips with NoPro. So I have connected the 2LL fans to the 1st hub I have on ports 1 and 2, then I connected the 2ML fans to the other hub I have on ports 1 and 2 and finally I connected the 2 hubs to the CoPro on LED 1 and 2. I also connected the NoPro on CoPro with the and the AIO to the CoPro with usb. On the NoPro I have 4 led strips. The problem is when I boot my pc it starts with rainbow and as it opens icue it turns to white , which is the color I chose. After A while everything gets crazy half of the parts turn to rainbow and the other half stay white. Plus the last led strip doesn’t light up. Icue is updated and all the parts I use have been fw updated. Any solution?

Found the problem! The 3 pin cable that was connecting the hub to the commander was faulty. Now everything works like a charm!

Sorry my mistake. The node is connected via usb to commander and I can see it in icue. The 2 lighting channels commander has are connected each one to a hub. On the 1st channel I had 2 ml fans and on the other 2 LL fans. That’s what I understood from the diagrams you have in this forum. But it doesn’t work! Don’t know why. The only way to get it done is to connect all fans to the 1st hab. I am telling you that cause the result is that on my second LL fan not all led work.

Hi guys 3 months ago I build my pc which has a h115i pro rgb in a Corsair 280x rgb. When I build it I had the ml fans from the AIO and the two LL fans connected to the rgb hub the case had. On Saturday I installed a commander pro and the lighting strips. I connected the commander to the usb of my mobo and the the AIOs usb to the commander. Then I connected all the fans to the commander in order to control rpm. Till here everything was fine! Then I connected the rgb hub to the commander on 1st port. In the second port I connected node pro and on it I connected on 1st port the rgb strips and on the second port an another rgb hub from Corsair. So here is the deal, the LL fans which are connected to the second hub through node pro are not lighting up. I tried many configurations and the only one working is to connect all ml and LL fans to the first hub. Also half of the leds on the second LL fans don’t work. PS: I made all adjustments every time I changed configuration. All of my Corsair Components are upgraded.