huzidada

So even at stock speeds that is quite hot, the chip should have No issues running 4,7GHz and above. There is two problems. The stock TIM that intel uses under the heatsink. And this cooler. I might have the same issue as you but this AIO is not good. Ive had like 6 different Corsair AIO and this is the first one that makes a lot of noise and cooling sucks. I thought I sorted out my problems yesterday and today under the same conditions, its running hot! I definitely preferred the Asetek pumps Also I think we are both running low RPM on extreme settings and because we both have HOT chips it shows. Think those running on Ryzen, which isa the large majority of new builds that bought this cooler, dont show it as much. The product definite sucks

I'm interested to know what your pump speed is set to extreme as I have a bit of the same performance and pump noise issues as you. However these chips kinda ran hot, with delids bringing that temp down a lot. Yours seems excessive tho, have you made sure backplate is mounted correctly and you have righted it down properly?

Anyone with the Pro XT cooler that can give me the extreme setting RPM for the pump on the latest iCue

Okay so Im keen to get what pump speeds everybody else is getting. I still feel my pump is a little wonky, but....... I have found the problem to my temps, its the new PSU. But not in a bad way. For as long as I have known Ive needed 1.285Volts to get a stable 4.8Ghz All core OC on this 9900K of mine. I started playing with Vcore and dropping by .05V at a time and guess what, no crashes. With all of it said and done I actually got a stable OC of 4.9Ghz at 1.26V all cores with a max temp of 78degrees running Cinebench R20 for an hour which is really impressive and just goes to show how important and vital a PSU can be to efficiency in OC as well But I still think my pump speed is a little weak so please guys let me know!!!

All new hardware as I gave my friend my H150 Pro Cooler. I checked the pump and it was mounted flush with a good spread of TIM so pressure seems perfect. I do not have the pump fan header plugged in though as I have my own fans so hide the cables and control pump through iCue. Do you think this makes a difference? My Bios settings are exactly what it always has been. I know the chipset inside out. I however did also uograde my PSU at the same time as cooler from the RM850i to the HX1200i. Is it possible that I may have "cleaner" power to the CPU and therefore should lower the VCORE a bit. Update. Okay weird thing is the temps go up at stock, 4.8 and 4.9Ghz to the same Temps. Lowering VCORE at a 4.7 OC doesn't do much for temps at all so I'm guessing the OC has nothing to do with temps. Can someone please confirm what extreme should be as I know with my H150 Pro there was a huge difference in performance between Balanced and Extreme and I'm guessing I'm not getting the full benefit of it by not getting the average RPM as extreme.

This is of CPU and confirmed via iCue and HWInfo. The H150 temp 34,30 degrees Celsius Lighting turned on white, completely off, or custom makes no difference to liquid or cpu temps.

Hi I recently did a small upgrade from my H150 Pro to the H150 Pro XT(I much preferred the black style and the new RGB). However I noticed that my temps are a bit higher than the H150 Pro by 6-10 degrees. Also in Extreme mode the max my pump will go is 2660 RPM and I was used to seeing 2800RPM with my older H150. Is this a problem? Maybe not operating properly? Its literally a week old Silent- 2000 RPM Balance- 2330 RPM Extreme- 2660RPM Does this seem right?

Dude!!! Thanks a freaking million man!! I just upgraded from the H150 to the H150 Pro XT and couldnt get the RGB to work...was using a SATA extension, that worked fine on my normal H150. Plugged into PSU sata and boom! All is fine!!! Thank you for saving me from an unnecessary RMA!!!

Yes bud ofcoz I Restarted. Doesn't show at all. It's an H115 Platinum cooler

I did the firmware update and noow my h115I Plat is not showing at all in iCue!!! HELP!!!

Corsair get of your high horse and give us customers an official answer. Is it hardware. Is it software. Can we get an exchange. You are losing us!!!! Idiots I swear

So glad to see I'm not the only one with this issue but so disappointed on corsair. I live in a bit of a remote location where buying their products costs a bit more money than I should be spending. My H115i Platinum arrived today for a new build. Completely clean and new. Turn PC on for the first time and Rgb works immediately and looks good. Windows boots up and immediately sounds of a device connecting and disconnecting every 30 seconds or so. Install iCue. Open iCue and set what I need to. H115 showing perfectly. iCue tells me there's a firmware update for the cooler. I do it and as soon as it 100% successfully finishes it just stops working. Can't see my cooler in iCue anymore. The pumps Rgb is a very faint blue color. Did everything from plugging it in to a different USB port to even reinstalling windows but nothing helped what so ever. Really don't know what to do