Jump to content

streetglider

Members
  • Posts

    13
  • Joined

Reputation

10 Good
  1. it doesn't do anything when connected to molex, no pump, noise, or vibration. I have a flow indicator in it as well is how I was able to tell it quit
  2. I have tried running the pump on commander pro, no 4 pin, and mobo water pump header and this was all after the commander pro started acting up. there is no noise coming from it at all and I have 12v to the molex connector on the pump side. only monitoring is msi afterburner for my gpu and cpu
  3. So my first pump went out within 3 weeks and barley had any use. took 3 weeks to RMA and finally got my new one and they determined that pump was bad. Fast forward another 2-3 weeks with the new pump and all of a sudden im starting to have the same problem. I can either wake it up or turn on after a shut down and the pump wont spin. I check icue and the 6th fan header is not even in icue anymore. after a couple force updates on same version of icue it should show up or I would have to delete icue all together and reinstall. I even tried hooking it to my waterpump header and still nothing. Then all of a sudden 2 days later it would start working. I just put a new mobo in last night and put all my lines back in. I jump the 24pin after filling my pump and once again it does not spin up. I then grab a brand new PSU and try it with that as well and still nothing. So now I have a dead pump again. How does this even happen.
  4. mine was the same way fort about a week then went out. im on my second pump and pretty sure it just died as well.
  5. they have always been set on auto and have been viable and working just fine. I finally just turned computer off and let it set again and it just magically reappeared. I went ahead and set them to 4 pin in hoping that this wont happen again. my fear was my commander pro was going out.
  6. its just weird that is has been working for month and just like that it disappeared for some reason
  7. should it be set to 4 pin even thought its only 2 pin? I cant set a speed since the number 6 slot is not even there now. all it shows is 1-5 which are ll fans
  8. So I woke my computer up and noticed it took longer foe the pump to start mind you this is my second one so I put a l flow indicator in this time. It started spinning and I went into icue to check to see if anything was wrong and now the slot 6 is missing where its plugged into, I just had problem the about 4 days ago the pump would not go over 800 rpm with I cue and icue wouldn't make it change. I let the computer shut down and sit for and hr and has been fine. its spinning right now but not able to see it to control it.
  9. could you use the stock backplate and the cpu block hardware ? I mean its wider cuz it will do intel as well so why couldn't the stock one be used since you staying with amd
  10. I think I found my answer but cant figure out how to delete
  11. Do I have to go by the in and the out for the water block or will it function fine backwards? I have to redo my loop after having to get a new pump and put my gpu vertical and it would look if I was able to run the lines backwards.. Or is it possible to spin the block upside down and change the black plastic trim piece ?
  12. So im waiting for an rma for my less than 2 month old pump that died. iv got a commander pro and trying to find the correct way of hooking 6 fans and the pump up. I know the pump goes in 6 but I have 6 ll120 fans. How do I hook up all 6 fans and the pump?
×
×
  • Create New...