Search the Community
Showing results for tags 'shroud'.
So i bought the 750D back in January with the intent of doing some actual custom mods to the case, but only recently got around to doing them. I loved the minimalistic shape and design of the case, but wanted to remove the drive cage and add a PSU shroud to make the interior as clean as possible. (as a side note to Corsair, if you could make a 750D with a removable CD drive cage, that would make this case flawless for water cooling in my opinion). Having pre-ordered the GTX 1080 and receiving it on launch day, I took the three-day holiday weekend to create a custom acrylic shroud to cover the holes/rivets on the back of the case, as well as the entire bottom PSU/hard drive area. Hope you guys like it! I think it turned out sexy as hell. If there's enough interest, i might make a youtube video tutorial. Used cardboard to prototype the shape of the final acrylic piece and verify measurements: http://imgur.com/9uGRH8I.jpg Cut a sheet of .22" acrylic to the desired flat shape of the final piece: http://imgur.com/rsXlpmG.jpg http://imgur.com/j7AHxcn.jpg After bending (using a heat gun and aluminum-wrapped wood boards to keep lines straight), I put the bent piece into the case to verify that it fits and everything still lines up. http://imgur.com/CfQNKjz.jpg Sanded the acrylic to allow the spray paint to adhere better, then painted with a matte black spraypaint: http://imgur.com/aCDLtvR.jpg http://imgur.com/XIVKRMa.jpg Now that it's all done, I wired everything back up and enjoyed the light show (thanks to the NZXT Hue+): http://imgur.com/iD3dwHX.jpg http://imgur.com/qkGqhoB.jpg
I love this case sooooo much...i'm willing to do extra hours just so i could buy this case... Everything about this case is perfect except : 1. PSU Shroud is open and we could see all the wires in the front.. 2. There is not even a slight gap between bottom of MOBO and the PSU Shroud.. The second one i can deal with it by routing it differently or by making a small holes in PSU shroud.. But the PSU shroud extension should have been given for this case, atleast as an optional accessory... I've never registered for a forum before...But i love this case sooo much & just to requesting corsair i've joined this forum.. Please corsair, requesting you to consider providing an additional PSU shroud as an accessory to cover up that gap in the front.. Thanks, Shyam