I just installed a new H100i v2 on my old I7-980x. Let me preface this by saying the system ran flawless for 8 years prior to installing the H100i v2, with the exception of swapping out the old PSU for a Corsair RM1000i a few years ago. Basically, I just wanted a less noisy cooling system. The Intel stock fan cooler was getting loud.
Please note: ignore my current PC specs on my bio they’re for my new PC. The I7-980X is on an Asus P6X58 mobo, GPU is an EVGA 680 Classified, 24GB Corsair Vengeance ram, and PSU Corsair RM1000i.
So now since I’ve installed the H100i the PC always takes 3 attempts before it will boot. It will attempt to start twice then shut down until the 3rd try where it will successfully boot into Windows. I only have to push the power button once then it does the rest on its own.
Also the PC will randomly shutdown anywhere from 5 - 60 minutes after it has been running. The H100i is also making a strange chirping like noise that my H150i does not make.
When I installed the H100i I cleaned the CPU thoroughly, however I did not reseat the CPU. When I tightened the CPU standoff screws connecting the cooler to the CPU I used a Phillips head, but didn’t tighten it a tight as possible. I also used the default CPU paste that came on the cooler bracket.
I would like to mention the tempts on the CPU are fine. I ran Cinebench twice with no issues.
Any ideas what may be causing the issue with 3 attempts to start before boot and the random crashes? Thank you for your assistance!