Search the Community
Showing results for tags 'not lighting'.
I recently purchased a PC in a 220t case having the three SP120 RGB Pro fans on the front that are included with the case. Then I purchased a fourth fan for the back of my case, this is also a SP120 RGB Pro wanting to keep things the same. I have iCUE 3.31.81 and have forced the firmware update on all my fans to 0.9.16. The issue I am having is the fan at the back of my case that I purchased does not light up the LEDs but spins to create the airflow, but I wouldn't mind if it also lit up to match the fans on the front of the case. The three front fans are plugged into the lighting node core in ports 1-3 and I plugged the newly purchased fan into port 4, have the iCUE set to 4 SP RGB PRO Series Fans. I have removed fan from port 1 and plugged it in port 4, it does not light up and vise versa new fan from port 4 into port 1. Also does not light up. Is there something in the settings I am completely missing or would the fan LED just be faulty? PC SPECS: CASE: iCUE 220t CPU: Ryzen 5 3600 MB: Gigabyte b450m ds3h GPU: NVIDIA GeForce RTX 2070 RAM: G Skill 16gb ddr4 3000 PSU: Deep Cool DA500 80+ Brozne SSD: WD Black 250gb HDD: Segate Barracuda 1TB
Hello everyone, I did a lot of research but couldn't find my answer on Google so here I am. I just finished building my new Lian-Li O11 Dynamic rig and of course I bought as much RGB fans as possible to showcase the build. I just picked up 6x SP120 RGB Pro and installed them today. The 3-pin fans work fine (currently plugged directly into 4-pin headers on the motherboard, I'm ordering a fan splitter to power the remaining 3 fans), the RGB 4-pin are plugged into the Lighting Node Core that comes included in each 3-pack fan kit. That is powered by a SATA cable (the same SATA cable that's also powering my SSD & HHD if that matters) and the other end plugs into a USB 2.0 header. The fans are plugged in sequential order 1>2>3>4>5>6. Here's the weird part, the fans do not light up. I updated iCUE to the latest firmware today, sometimes it would light up, but 95% it wouldn't, I was messing around with the settings and sometimes when I set my fans to "SP120 RGB (non pro series)", it would light up but I wouldn't be able to control the lighting at all. Then a restart and it's all gone, back to square one. I'm super frustrated, am I missing a component to power these lights? I even checked my power supply cable, switched 2.0 header ports, even swapped out the Lighting Node Core to see if that was defective. Nothing is working, please someone shed some light on this. My specs: R7 3800X Gigabyte X570 Aorus Master G.Skill 32GB TridentZ 3600MHz @ 16CL Sapphire Nitro+ 5700XT Seasonic Gold Prime 850W PSU DeepCool Castle 360EX AIO Lian Li O11-Dynamic EDIT 1: So I got all the lighting to work on the fans. I just unplugged all and restarted and went one by one. In iCUE my fans only work when its set to SP RGB SERIES Fan even though mine are SP RGB Pro Series. Whatever, but the weird pard is that the LEDs are all wonky, all fans are flashing difference colors when I use Rainbow shift but one fan. The one fan does it correctly, the rest are not correctly colored unless I put them all to white LED. Even certain static colors don't match, for example I tried yellow and 3 of the 6 fans are yellow, the rest are magenta and other random colors. https://imgur.com/a/WD3Z469 EDIT 2: I swapped out USB headers, did not work. I swapped out lighting node core, did not work. I did test each fan individually and when they're plugged into port 1, every effect works normally. Any fan plugged from Port 2-6, they all flash/flicker so I know it's not a fan or LED issue. So fan#1 plugged into port#1 works fine. Fan #2 plugged into port #2 flickers. But if I switch the ports from Fan #1 to port #2 and vice versa. Fan #1 would flicker and Fan#2 would work flawlessly. And its not a lighting core issue because I did the same with a brand new lighting node core, same symptoms. But what's the cause of this? I even tried to plug the lighting hub core into a separate SATA cable for the PSU. Still didn't resolve the flickering when I set a pattern.
As title, I was running iCUE probably a few versions older. All was well. I updated to the very latest version yesterday and since then, whenever I boot up my K70 LUX RGB is not lit, nor is it shown in iCUE. I have tried restsrting ICUE, doesn't help. The only way I can get it recognised is to flip the BIOS switch from one side (4) to the other (1), then the keyboard shows up and lights up. Any details about this issue on the forum anywhere? Cheers.
Hey, i have 6 HD 120s, 3 led hubs, and a commander pro currently only the fan in slot 1 of the led hub is working. i can control all the fan speeds and the 1st fan's colors, but not the rest. i have tried using 2 other hubs and i still have the same problem. i have check all the fans led's and none are out. On icue i have lighting cannel 1 set to 6 Hd fans too. If you could please help that would be great. Nick