Search the Community
Showing results for tags 'lights wont work'.
I've bought 4 LL 120 two year ago (w/ 1 command and 1 lightning node) but they only worked perfectly for a month or so. After that started to have a few sinc issues, like 'dead colors' in some parts or losing rgb sequence (usually I use the "rainbow wave", and i could easily notice that). During these years, I tried a few things to solve: 1 - changed the cable sequence on the lightning node 2 - changed the lightning node for a new one 3 - changed the power connection (I had to change my power supply) 3 - updated the iCue and the firmwares 4 - formating my PC (It wasnt because of that, but anyway...) After that I started to use only 2 of the 4 coolers, and they were working just fine (showing all the colors normally). The other 2 were unplugged from ligthing node. Them I thought "Okay, so the problem is with these coolers" and bought 2 new coolers (SP 120) to use with the older ones. But after that none of them are showing colors lol. The good thing is that they are working just fine as coolers, the problems are only with the lightning part. Everything else seems to be okay. Any suggestions of what should I do? iCue shows all of them, and they seem to be working just fine on the software, but now I only have one cooler showing a fixed white light lol. I've tried to disconnect both LL and left only the SP on the lightning node, but it doesnt change anything. Besides that, I also have a lightning strip that works perfectly on the commander.
So i currently own in my rig K70 RGB mk.2, H100I platinum pump, Vengeance RGB ram, and a lighting node pro connect to 4 strips and 4 LL 120 fans. The fans and the strips after about 4 mins or so after start up the lights start to freeze up or shutter(any color changing mode). The only way i can fix is to restart my computer or sometimes restart Cue software. But, still it keeps happening and i dont know why. Everything is update as well. Would anyone know whats going on and how to fix?
I am having a remarkable amount of trouble trying to come up with solutions to why my Corsair Lighting Node Pro and the 4 LED strips that come with is will never remain working after a reboot of the PC. I have tried the firmware solutions that have been suggested to everyone else, as well as trying to connect to several different USB hubs on the MOBO. I have even tried sever different SATA connections to the node itself, nothing seems to keep the lights working after I reboot the computer. Sometimes the will come on and be recognized by Corsair Link, then after I am finished customizing the lights to my liking, I restart the computer to make sure everything is working the way that I want them to. But every reboot they turn off. At this point I can only assume that my Corsair CX750M PSU isnt supplying them with enough power on reboot and the wont turn on for that reason. I am unsure how to tell if my PSU gives out enough voltage to handle the light strips, but i would like to find out if I will be able to use these strips or if I'm going to have to take them back to the store. Any advice would be helpful, I've been working on this for two straight days and it's beginning to get a bit frustrating. Thank you!