Search the Community
Showing results for tags 'disassembly'.
Hi All, I couldn't find a full disassembly walkthrough or solution for my error, so I'm uploading a noob-friendly guide to the solution I (eventually) found. Images uploaded to imgur. It started with my mouse occassionally not working on startup, but would work once unplugged and plugged back in again. Then it just wouldn't recognise it at all. No amount of driver/iCue/windows10 updates helped. I found a forum post for a similar issue that suggested unplugging the USB passthrough, so I thought I'd try that. But that means taking apart the mouse. Unplug the mouse from your PC Remove the FOUR skids from the base of the mouse. Note: each skid has a small access point to begin lifting from (these are shown by blue arrows in the attached image 1) Unscrew the FOUR torx screws from under the skids with a T6 screw driver (see image 2) Remove the three top pieces. I found the two sides just fell off, however the center piece needed to be pushed forward (towards the wheel). The sides ARE held on by several small knotches on the base, so try pushing upwards if it's stiff. Follow the cable to locate the USB passthrough (see image 3). Should be a white connector with 5 wires running from it. Pop that bad boy out GENTLY. Whilst the passthrough is still UNPLUGGED, plug the main cable back into your PC. Then, gently plug the white passthrough back in. If it worked, the lights should turn on and the mouse should respond. Unplug the main cable from your PC, and reassemble the mouse. Note that the center piece has a small latch under the left click button (circled in images 4 and 5)
The sniper button recently broke or came loose and I was wondering how to remove the side of the mouse so I could get at the button and see what's wrong. There are plenty of videos explaining how to get the back off, but none on removing the side. Also, will removing the side of the mouse void the warranty?