Search the Community
Showing results for tags 'deepcool'.
-
I recently upgraded my motherboard, ram and cpu to the ASUS B450M Aii, Corsair Vengeance ddr4 3600 RGB PRO, and Ryzen 5 5500, which lead to another problem. My DEEPCOOL Matrexx55 ARGB-W case, with mounted LED strip(5v), and 6 CF120(5vARGB) fans will not work with the 12v RGB header on the mobo for RGB control. The Commander Core XT looks like the route I would prefer to go, since I already use iCue for my K55 Keyboard, Void Elite headset and the new Vengeance Pro RGB ddr4 3600 ram. When I initially build out the case, having all branded products seemed logical, especially with the RGB controller built into the case. While I can still use the case for lighting, I would much rather use software and have more control over the RGB. After determining that the 12vRGB header on the mobo isn't compatible with the ARGB fans, I found a DEEPCOOL 12v-5v Transfer hub. That didn't solve the problem either, as ARGB and RGB don't work the same. I am using 6 DEEPCOOL CF120 fans, 3 mounted in the front, 2 in push/pull on a Coolermaster Hyper212 EVO and one for exhaust in the rear. I would be much happier to control everything with iCue instead of using the case mounted controller. Is there a connector/adapter to use my DEEPCOOL products with the Corsair Commander Core XT to control the lighting in my case? Current Build - Case : https://www.amazon.com/pre-Install-MATREXX-55-V3-ADD-RGB/dp/B07Z8T2BZN?th=1 Fans : https://www.amazon.com/DEEPCOOL-CF120-3in1-Customizable-Addressable/dp/B07D3K4XG1/ref=sr_1_1_sspa?crid=2QGP9UI3V23TJ&keywords=deepcool+cf120&qid=1654298004&s=electronics&sprefix=deepcool+cf120%2Celectronics%2C87&sr=1-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExVUlPQkRLRTRNTThQJmVuY3J5cHRlZElkPUEwNzI1NjE3MkNGVzZTN1dITjZFRyZlbmNyeXB0ZWRBZElkPUEwODUyMDc5MkczUkFaTzRUS1BSTiZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU= 5v-12v Transfer hub : https://www.amazon.com/DeepCool-RGB-convertor-ADD-RGB-Transfer/dp/B09Y8V5X98/ref=sr_1_1_sspa?keywords=deepcool%2Brgb%2Bconverter%2B12v%2Bto%2B5v&qid=1654298032&s=electronics&sprefix=deepcool%2B5v%2Celectronics%2C82&sr=1-1-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUFFVDZZSUY0SjkyRzImZW5jcnlwdGVkSWQ9QTA4NTYxNjUzM01TWDkzM1VXTkZYJmVuY3J5cHRlZEFkSWQ9QTAwMDIxMTgyVlREUEVWVk5WUElIJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1 Motherboard : https://www.amazon.com/dp/B08KH12V25?psc=1&ref=ppx_yo2ov_dt_b_product_details RAM : https://www.amazon.com/dp/B08SQ75MP7?psc=1&ref=ppx_yo2ov_dt_b_product_details
-
Hey, I'm not that familiar with iCUE and I wanted to ask if it was possible to control 3rd Party fans when their directly plugged into the ARGB Header on the motherboard, without any outside controller if possible. I use a A520 Aorus Elite by Gigabyte and I don't like their software so I wanted to try this. The fans are from Deepcool. Thanks in advance
- 1 reply
-
- compatibility
- deepcool
-
(and 2 more)
Tagged with:
-
I have read some guides here about RGB lighting for my case and how to connect them. I was planing to go for a triple pack of QL120s and then get the Lighting Node Core with it. I am also going for an H115i Platinum and one extra single QL120. I have couple of questions: I will connect the four case fans to the LNC, but will the RGB for the AIO fans connect to this as well, or do you connect the RGB from those to the pump itself? A lot of people on here recommend the Command Pro, but I feel it would be a it waste to buy that for about $80 when I get the LNC with the fans and a DeepCool FH-10 fan hub costs me $20 where I live. I know the Command Pro gives temp and USB 2 as well, but I think I am fine with the two USB 2.0 ports on my mobo as well as one 3.1 gen 1 and one gen 2 port. I haven't read much about the DeepCool, but it sounds OK. Would this setup work fine? LNC for RGB and DeepCool for PWM to the mobo?