Search the Community
Showing results for tags 'corsair vengeance rgb'.
Hi, I currently have an ASUS B360-plus tuf motherboard with 2x8gb Corsair vengeance RGB ram sticks (Corsair Vengeance RGB 16GB (2x 8GB) 2666MHz DDR4 RAM, Voltage: 1.2V, Latency Timing: CL16, Speed: 2666MHz (PC4-21300), 2 x 8GB DIMM Dual Channel Kit, Intel XMP Profile Support, non-ECC Unbuffered Memory, CMR16GX4M2A2666C16). I kept getting blue screens of death due to a memory error so decided to get some new ram. I purchased 2x8gb Corsair vengeance RGB Pro ram sticks... Memory Type: DDR4 Memory Speed: 2666 MHz Voltage: 1.2 V Designation: PC4-21300 Memory Size (Total): 16 GB Number of Modules: 2 Memory Size (Individual): 8 GB Pin Configuration: 288 pin Memory Package: DIMM Bus I/O Configuration: Unbuffered Error Correction: No CAS Latency: 16-18-18-35 These ram sticks don't work either on their own or with the currently installed ram. They light up but the computer won't boot at all. I recently upgraded my bios for windows 11 (although I went back to Windows 10) and couldn't see any bios options to change for the new ram. Any pointers would be greatly appreciated. Many thanks, Jon Full PC spec below (in its current state i.e with the old ram installed). OS Name Microsoft Windows 10 Pro Version 10.0.19043 Build 19043 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name DESKTOP-3J9JL2R System Manufacturer ASUS System Model System Product Name System Type x64-based PC System SKU ASUS_MB_CNL Processor Intel(R) Core(TM) i7-9700K CPU @ 3.60GHz, 3600 Mhz, 8 Core(s), 8 Logical Processor(s) BIOS Version/Date American Megatrends Inc. 2901, 13/07/2021 SMBIOS Version 3.2 Embedded Controller Version 255.255 BIOS Mode UEFI BaseBoard Manufacturer ASUSTeK COMPUTER INC. BaseBoard Product TUF B360-PLUS GAMING BaseBoard Version Rev 1.xx Platform Role Desktop Secure Boot State Off PCR7 Configuration Elevation Required to View Windows Directory C:\Windows System Directory C:\Windows\system32 Boot Device \Device\HarddiskVolume4 Locale United States Hardware Abstraction Layer Version = "10.0.19041.1151" Username DESKTOP-3J9JL2R\JonA Time Zone GMT Standard Time Installed Physical Memory (RAM) 16.0 GB Total Physical Memory 15.9 GB Available Physical Memory 10.3 GB Total Virtual Memory 18.3 GB Available Virtual Memory 11.7 GB Page File Space 2.38 GB Page File C:\pagefile.sys Kernel DMA Protection Off Virtualisation-based security Not enabled Windows Defender Application Control policy Enforced Windows Defender Application Control user mode policy Off Device Encryption Support Elevation Required to View Hyper-V - VM Monitor Mode Extensions Yes Hyper-V - Second Level Address Translation Extensions Yes Hyper-V - Virtualisation Enabled in Firmware No Hyper-V - Data Execution Protection Yes
Hello everyone, Here's my first post: I bought Corsair Vengeance RGB 3000Mhz C15 (CMR32GX4M2C3000C15). The two ram sticks are installed on an Asus z390-i motherboard with a 9900k cpu. I set VCCIO and System Agent to auto, which is 1.328 V for VCCIO and 1.232 V for System Agent. People commenting on Reddit and YouTube said I should lower it. When I asked the same question on Amazon, Corsair replied and basically said leave it on auto. The overclockers seemed to make a compelling argument, so should I still lower the VCCIO and System Agent voltages by a little? I know lowering it too much could be dangerous, so how much should I lower it by? Also, is MemTest64 and Aida 64 sufficient programs for testing memory stability?