Search the Community
Showing results for tags 'corsair one pro plus'.
CORSAIR ONE Z270 BIOS 4C3 Update SOP Important Note: This guide ONLY APPLIES to CORSAIR ONE systems equipped with Z270 motherboards and 7th Gen Intel Core i7 processors. Step 1 – Prepare a USB drive with the BIOS update files Download BIOS update from CORSAIR.com (or click here for direct download) and prepare a USB flash drive by unzipping the download file and copying the contents of the unzipped folder to the root of a blank USB drive (formatted FAT32). Step 2 – Boot to BIOS w/USB drive inserted Insert prepared USB drive into your CORSAIR ONE and boot to BIOS by pressing DELETE key until the BIOS screen appears. Step 3 – Disable Secure Boot in BIOS Once in BIOS, hit F7 and go to “Settings” -> “Advanced” -> “Windows OS” -> “Secure Boot.” Ensure that “Secure Boot Mode” is set to “Disabled.” Step 4 – Boot from USB flash drive Change the Boot Priority in “Settings” -> “Boot.” Change “Boot Option #1” to the UEFI USB Key (the prepared USB drive with the BIOS update files). Hit F10 to save settings and restart, the system should now boot from the USB drive. Step 5 – Follow prompts to proceed with initial BIOS flash Note: If the current BIOS is version 4QF, the following prompt will appear: Note: The system will reboot once during this process. Step 6 – Reboot to complete initial BIOS flash and return to BIOS to begin second flash] Press DELETE key as the system boots to return to BIOS screen. Hit F7 to go to “Advanced mode.” Select “M-FLASH”, follow the prompts. Select the “E7A66IZ1.4C3” file on the USB drive. Continue following the prompts, the process may take a minute or so once it starts. Note: The system will reboot twice during this process. Step 7 – Go into BIOS again and apply default settings During second reboot of the BIOS flash, hit DELETE on your keyboard until the BIOS screen appears again. Hit F6 to apply “Optimized Default” settings (this’ll undo the “Boot Priority” and “Secure Boot” changes made previously) Hit F10 to save and exit BIOS.
Hey there, I'm trying to utilize a 2 machine, 1 monitor, 1 keyboard & mouse KVM setup: Machines Corsair One Pro Plus [CS-9000013-NA] Mac Pro 2013 Monitor Acer Predator XB271HU 27" (1440p / 165hz) which only has 1 DisplayPort. Keyboard / Video / Mouse Switcher (KVM) Tripp Lite 2-Port DisplayPort KVM Switch (B004-DP2UA2-K) Before the Corsair One, I had an older gaming PC (w/ a GTX970) and this KVM switch solution was working fine. It could do 165hz at 1440p. Now that I've connected the Corsair One (all drivers fully up-to-date)- the KVM signal fails. I get a 1 second flash of my PC desktop before it goes to black and displays "No Signal". If I switch it to the Mac and then back, same thing - 1 second flash of an image and then black. So the video signal is getting through the unit to a certain point and then something is shutting it down. Troubleshooting I've tried with no luck: I've tried bypassing the KVM with straight DisplayPort cable and it works fine. Straight HDMI cable also works fine. Unplugging the power of the Corsair One & the Monitor for 1 minute and plugging them back in. Mac Pro 2013 via DisplayPort through KVM (still) works fine. ____ So it seems the KVM unit is the problem but it worked fine before with my older PC - so I'm very perplexed. Any ideas of what else I can try?