meegja

In my case it is with certain programs I use. One of them is Mandelbulber, a 3D fractal program. Most of the time I render with my GPU and all is fine. But certain settings can only be done with CPU renders and then 100% of CPU is used and the stutter appears. With most other applications (including gaming) my GPU is used and there is no stutter. The Node Pro is attached to a sata power cable where also 2 SSD's are attached. But when I render, the SSD's are not use at all. But it indeed looks like a power issue. When I close all Corsair services and iCue, it falls back to it's hardware setting. And then also the stutter is there. So, all in all not a major problem. Just a bit strange :)

I have (almost) the same issue. I only have some Corsair RGB strips with the Node Pro (latest firmware) and the latest Icue software. When hitting full CPU usage, the RGB patterns are starting to stutter. Did check on PSU (Be Quiet! Dark Power Pro 11 750W) and on my system that should be more then adequate.

I have already 1 set of CMK16GX4M2B3000C15 in my system. Did order another set of CMK16GX4M2B3000C15 to expand to 32 Gb. It will work but it seems unstable? For example with XMP on, there is no boot. According to CPU-Z these are the differences: Current RAM DRAM Manuf.: Micron Technology Ranks: Single JEDEC #6 RAS# Precharge 15 New RAM DRAM Manuf.: SK Hynix Ranks: Dual JEDEC #6 RAS# Precharge 14 Will not use XMP and set it manually to 1.350 V work? Or will there be issues?