Jump to content

clubfoot

Members
  • Posts

    29
  • Joined

Everything posted by clubfoot

  1. My registry always shows 00 on fresh install so I have to delete the key and recreate it from scratch. http://forum.corsair.com/forums/showthread.php?p=822047
  2. The RMi has a fan button on the cable outlet side,.... sounds like the RM doesn't! You have to edit the USB section in the registry because on some Mb windows does not make the proper entries, one of mine is always corrupted after fresh install. There are several threads here describing what to do. I have link working on two different Asus boards, both with RMi psi. So it's not the software. Sounds like you had a faulty H100. Idle for mine is 30ish with 70s high.
  3. You can also test the fan by pressing the fan switch on the psu and if it spins it's OK! The zero rpm works as it should,...silent PC and it is WAY more psu than even I need. I have an H100i and it cools my i7 at 4.5G to 70 degrees at full load, so, you may want to remount the pump and not over tighten it. I run Link and it detects and controls the H100i and my RM1000i no issues what so ever. Of course I don't run it in the back round because the H100i and my video cars are smart enough to ramp up by themselves automagically:)
×
×
  • Create New...