Saberous0426

I'm unable to get ICUE to work with my stream deck. I've uninstalled and reinstalled both software's with the same result. ICUE SDK is enabled.

Update, I contacted Corsair support and they provided me an RMA for the mouse. Received the RMA mouse and after three minutes or three hours of wireless use, my key binds dropped while in wireless mode...

Thanks! I do have a couple on it. 3 RGB Fans, and 3 non RGB.

Is 4.82 V to low for the 5V Voltage?

Like the title states, while using the mouse in wireless 2.4ghz mode, the mouse will work for a bit and then drop all assigned key functions. Only mouse buttons that work, are left and right mouse buttons. I have to plug the mouse back into the power cord to get the mouse to work again. iCUE v.4.25.155 Ironclaw rgb Wireless v.5.0.130 Slipstream wireless usb receiver v.5.66.126, plugged into usb port on pc. At first I had this plugged into my K95 usb slot, but then moved it to the PC. I've tried all usb ports on my pc. All with the same result.

I'm currently having the same issue. Just on DPI stage active at 800, all other stages set to 800 and disabled. DPI up was rebound to -_ (Warzone ping) and DPI down =+(prone). Whenever I would ping or prone my sensitivity would be all over the place. I found a work around, I think. This worked for me, but I'm not sure if it will help others. Delete all the onboard mouse profiles. Then upload the main profile you are using to all slots of the mouse's onboard memory. This worked for me but there were times, I would have to redo the above steps. As something in icue or the mouse would reset, causing the dpi issue to return.