Jump to content
Corsair Logo Corsair Logo
Corsair Community
CORSAIR COMMUNITY Survey, we want to hear your feedback!

Andreapunk

Members
 View Profile  See their activity

  • Posts

    6

  • Joined

  • Last visited

 Content Type 

Everything posted by Andreapunk

  1. Andreapunk
    Hi guys, I have a question for you, I'm setting up a new pc with customized liquid cooling, considering the fans (4 x ql 120) (7x ql 140) and the rgb components of the hydro series (block for cpu and pump / tank and GPU) I have a total of 14 connections for the leds, I wanted to connect them all through core xt which is the simplest in my opinion to use, but I have only one usb port remaining on the motherboard, do I need 3 xt cores? how can I do? thanks in advance: D
  2. Andreapunk
    Thank you LeDoyen 😉 Hi DevBiker, I have seen that you have tried several configurations. For you it would be better to have the radiator on the side with 4 x 120 QL fans with incoming flow and a front radiator with 6x 140 QL fans always in suction, or a radiator on the side as described above and one on the top of the case with 6 x 140 fans QL with outlet air flow? Did you notice obvious differences on the maintenance of the powder radiators with the different configurations?
  3. Andreapunk
    Very nice configuration, even these elite ML fans are very nice on that 😄
  4. Andreapunk
    Do you think the 480 gts (when I have the GPU) it will be enough for both of us? On the upper side I wanted to have the fans visible both for external and internal and with outflow, perhaps on the front panel there could even be a push pull with inlet flow, as I would do with the side panel, but I'm not sure if the pump XD5 can be mounted back those fans in the front
  5. Andreapunk
    For now the CPU only, and is a i7 11700k, but I have to buy the GPU when the prices turn back to “normal” cause mine is a bit old (1070 gaming x 8g from MSI), yeah for the 2 240 I was worried exactly about the dept of the end tanks
  6. Andreapunk
    Hi everyone, i am making a new pc, i've already bought the 7000x iCue case, and was planning to put a 480 mm XR7 radiator on the side panel or two 240mm XR5 radiators both always on the side panel, is it feasible or you have to mount a single radiator from 480mm? Honestly i don't want to put any more radiatrs on the front panel or on the top of the case. All this is because i am a little worried that with the 480 XR7 with the thickness of almost 6 cm the gans i want to put (the QL 120) are too weak to have an optimal cooling with such a thickness. Tell me what you guys think 😀
×
×
  • Create New...