Keawon

I have Aorus Z690 Pro rev1 with bios F21, and 2x 16GB Vengeance DDR5 5600. I have no problem with XMP and 5600Mhz. Have u installed sticks in right slots? Fully seated?

If u check Y-splitter it has 8pins. So either u have to buy two of 4pins or one 9pin.

Maybe try to get a 9-pin instead then use Y-splitter that comes with AIO? https://www.amazon.com/9-Pin-Motherboard-Header-Single-7-8inch/dp/B08Q2TLWGV

Nothing changed for me with v.25.155 is it v.26 that will fix red triangel?

iCUE v4.25.155 is out. What happend with v.26?

1: Have you updated bios to latest, almost all rev1 mobo needed to do this to support all types of RAM. 2: RAM slotted in correct slots. My PC with same RAM and CPU as ju would on post with 1 stick of RAM and at baseclock until i flash BIOS with latest firmware. Then it worked with two sticks and after enable XMP at full 5600 speed.

XMP = Extreme memory profile. You have to choose same profile for both.

Looks like u running two diffrent profiles for them XMP 1 and 2. Is there a memory setup u can choose this?

Corsair replied 5 post up. Mid July they said.

1: is memory supported? 2:Bios updated to latest? 3: Is memory in correct slot?

There is two type of changes "Lightning Effects" changes lights when iCUE is running and "Hardware Lightning" when iCUE is off, rebooting and so on. I have notice after I change lightning 1 cant press anything within RAM settings without turning off RGB or to default settings. I just change tab by clicking on H150i tab or lightning node. You could try that after change RGB.

What firmware on Commander Core and LCD screen are you running?

What do you mean not seeing Commander Core? If your cooler works as intended it should say your coolers name like H150 EliteLCD. If it says commander core then something is faulty.

How do you rotate it? in what program? I mean if you just use windows photo/image viewer and rotate it, it changes the view mode on your PC and not the core information/file.

I would just try to enable X.M.P Does it boot to windows with factory settings? Do ur mobo have debug LED?

Hi, 1. Latest MB bios firmware? 2. Do you manually setup the memory or you use XMP profile? 3. Have you inserted memory stick in correct slot according to MB manual?

Hi, again. According to ur MB manual if you only rocking 1 single stick it should be slotted in A2 and not B1. Try that.

I would say try update BIOS to the latest, your ver.0604 is the initial release bios for the MB.

Same issue as me, been 3 months now, there is nothing we can do then just wait for new firmware coming June/July with v4.25.xxx

Corsair said it on earlier post end of page 19, this will be fixed in 4.25.xx. should be out in June.

Same here, will try the external usb adapter and if that doesnt work i prob... will return this **** and buy other brand. Have u checked all connections so things isnt loose? Updated MB bios and so on? have it ever worked for u? mine worked for 2 weeks before the red triangel.

What i can see from ur screenshot, in Commander Core Settings their should be and LCD Screen settings. Maybe thats why its crashes when trying to update LCD to 1.1.7.7. I just got my Commander Core replaced with new one and still have problem with red triangel and so on. Iam 100% sure this is firmware/software related problem. So if you cant wait until Corsair get there problems sorted, returning is the way to go. Myself order a Internal USB adapter to connect to external usb port instead MB header. Should arrive tomorrow.

I just got a replacement commander core. Before I installed it removed iCUE, and deleted all files in regedit/%appdata% and so on. But it still shows error triangel. Funny thing is when i Force Update the LCD Screen Firmware then LCD works for 1-2sec when uploading the firmware, then it goes back to error triangel. 100% sure the problem is in software/firmware.

Hi yes, the latest FW from yesterday. I have also disconnect 20-pin atleast 20times and all pins are fine and fully seated. The problem just appeared by itself after working for some weeks. What to do next? return it?

I still have problem with error triangel of doom. iCUE shows commander core instead of H150 liquid cooler. Have tried every instructions according to support, forum and all the firmware, reset and so on, even on another PC and yes have also checked all connections and pins. The thing is it worked completly fine and until one day when powering on PC. Anyone have any suggestion?