SteaminDemon

Also forgot to mention there is nothing coming on screen/no POST. Might have been obvious due to the specific issue but just want to supply as much info as possible.

Howdy! I just got this issue solved thanks to the lovely people on here! I too have 7 fans and only had 6 connections on the Core that came with my case. What I believe you need would be a splitter cable for the PWM connector and another splitter cable for the RGB connector. So in total 2 Cables BUT make sure you order the right cables 1 for PWM side and 1 for the RGB side. Im not a pro at building but all my fans are spinning up right and lighting up fine after the cables came in. If you need exact parts let me know and I'll provide images to what I bought.

So I finally got the cables anyways. Now I have a new problem... if you have time check out my new post. I feel like such a noob at building after kot doing it for a long time haha. Hopefully someone on here can help.

Hey! Just got my splitter cables to wire my fans and finish my upgrades tonight. I thought I'd be able to boot up just fine first try. Unfortunately my luck seems to have run dry. I turned the PSU power on and hit power button on the front, then noticed my MOBO is giving me the DRAM and CPU lights flashing alternatively. Im thinking it may be a part compatibility issue or a bad MOBO. It's been a while since I've built my own PC so I'm hoping someone's got more brains on the topic than I do haha. My parts are: MSI MPG Z490 GAMING EDGE WIFI LGA 1200 Intel I7-10700F Corsair Vengeance RGB Pro 32GB Gigabyte GTX 1660 Ti OC 6GB Corsair iCUE 5000x RGB Corsair RMx Series (2021) RM850x Corsair iCUE H150i Elite Capellix Seagate Barracuda 1TB WD NAND SSD 1TB I'm hoping anyone can give me some troubleshooting ideas or even a straight on answer. If I have to buy new parts I'm okay with that just want a running PC with no problems.

Yeah I know that. However I added an extra fan to the back of the case that could not fit with only 6 slots. Bought splitters for the rgb and pwm connections and put 2 fans on one connection each.

Okay phew that's a big relief! If possible could you direct me to the exact parts I need I'll express order them asap. I'll definitely keep tabs when I get those in and can figure my wiring out.

If I did my research right I bought the 5000X RGB which comes with 3 SP120 RGB Elites. I bought an extra SP120 RGB Elite for the back. The H150i comes with 3 ML120 RGB fans. I'm really hoping this setup doesn't cause issues for me lol. Also I apologize for not being super specific it's my first time reaching out like this but I'm getting desperate to fit my PC back. Hopefully these screenshots can give you a better idea of what I'm working with. If I missed anything let me know and I'll try my best to get back asap.

Hey! It's been a while since ive built a PC and I'm in a bit of a pickle currently, I was wondering what is the right way to wire the H150i? I also would like to know how to make 7 fans work with the setup I have. 3 SP120mm RGB are mounted to the front, 3 of the same fans on the radiator which I'd like to top mount, and one on the back for exhaust. I need a way to connect all fans and sync them but currently I'm stumped at how I'm able to sync all the fans with the Commander Core that comes with the H150i. It only has 6 slots on both sides for power and rgb. Currently at work but hoping I can get some answers how to properly wire everything with this setup. I can also supply pictures if needed at when I have more time. Hope you can help and thanks in advance!