I have a question regarding the "CMW16GX4M2K4000C19". I have two kits installed an both have one bright one and one slightly yellowish-one. (see photo) - In real its much more visible...!.
I like my new clean white build, but i dont like that the white is not matching properly. Two out of 4 DIMMS. (#FFFFFF) FTW.
Through Thaiphoon Burner i checked the detials of my ram and it seems, that the two with worse lighting have Sensors build-in of STMicroelectronics.
DIMM 1, 3
THERMAL SENSOR
Manufacturer: ABLIC Inc.
Model: S-34TS04A
Revision: 21h
Sensor Status: Enabled
EVENT Output Control: Disabled
Temperature Accuracy: B-Grade
Temperature Resolution: 0,2500 °C (10-bit ADC)
Current Temperature: 51,500 °C / 124,700 °F
Negative Measurements: Supported
Interrupt Capability: Supported
10V of VHV on A0 pin: Supported
DIMM 2, 4
THERMAL SENSOR
Manufacturer: STMicroelectronics
Model: STTS2004
Revision: 01h
Sensor Status: Enabled
EVENT Output Control: Disabled
Temperature Accuracy: B-Grade
Temperature Resolution: 0,2500 °C (10-bit ADC)
Current Temperature: 53,750 °C / 128,750 °F
Negative Measurements: Supported
Interrupt Capability: Supported
10V of VHV on A0 pin: Supported
Is there a quick solution or do i have to return the ram?
Thanks in advance!
B1