Any progress on the measurements @Ledronnie?
Could you measure the distance from the side bracket to the door cover behind it, from inside the case, including the bracket itself?
From the look of the manual for the pumpless EK- Quantum Kinetic FLT 360 D5/DDC Body D-RGB
https://www.ekwb.com/shop/EK-IM/EK-IM-3831109822463.pdf
It looks like you could get just the resevoir, mounted directly on the inside of the bracket without the mounting kit, and then fit a thin DDC pump on the back.
Those are 38mm thick including the housing which you don't use, so I'm pretty hopeful this would actually work ok in the case...
I'd love to get a distro with the pump on the rear, so much more elegant, otherwise I'd want to hide it below the top of the PSU shroud level, out of sight...
This Bykski plate would work so well in this case, given the grille patterns:
UPDATE:
Having watched Provoked Prawn's build here: [ame]
[/ame]
look at 2:50, bottom right, and 10:01-10:15..then how much the bracket is inset at 13:25... all these mm add up.. 5 of inset, 2 of bracket, 25 of fan, plus the space up to the front fans.
it looks like there's a fair bit of "headroom" when side fans are installed, up to where the side of front 360 fans would be mounted..
If you were to reverse the side fan bracket, screw it "inside" the case rather than onto the outside of the places designed for that, then screw in the FLT directly to that bracket, maybe with some standoffs, I'd be surprised if the space thats in total available, if you measure from the side of a front-mount 120 fan, to the inside of the right panel through the bracket, isn't sufficient to place the FLT with DDC on the back.
Please, OP, please fit a 120 into a front bay, then measure from the side of it furthest from glass through to the outside right panel, fitted on, and let us know total usable mm!
I'm seeing a 360 push-pull in the top, distro or FLT in the side, and 360 push or pull in the front.. in my dreams
laso looks like theres plenty of room to squeeze an lcd between the psu shroud and the glass... im droolin..
:))
Let us know! thanks :))