idsuni

Hello Corsair Community! I am having this headset for around a year now, sadly the right speaker stopped working today and I cant figure out why since I didnt change a single thing. What I have tried so far: -switching from wireless to wired, unplugging everything, restarting the pc etc. -uninstall and reinstall the drivers -uninstall and reinstall icue + check for updates etc. -see if one speaker was turned off in windows settings (Headset Properties -> Levels -> Balance etc.) -some other stuff i found on forums But somehow I cant figure out why it stopped working. I hope someone can help me out :) Edit: I found a solution. For everyone else having the same problem: Try a soft reset: 1. Make sure your headset is powered on and unplugged. 2. Make sure your headset is in wireless mode. 3. Hold the Mute button on the headset down for about ~15 seconds. 4. Switch the headset off and then back on (turn the switch from Wireless to USB and back to Wireless). 5. Test your headset and see if the issue is resolved. I hope I could help someone, bye :)

Ye I kinda had that feeling. So what I did now was to connect the 2 fans to the hydro and connected the RGB cable to the RGB Hubs. I hope it works :S

Hey all :) I hope I am right here with my question. So I am building my new system rn and have some trouble connecting everything. I have a 680x case (with integrated LED and RGB Hub). I also got myself a h115i (two fan) and a Commander Pro. So far I connected everything like that: RGB HUB (I connected everything with RGB to it, so the 3 front fans, the one on the back and the 2 from the Aio) ->connected to LED HUB (1 LED cable from case) -->connected to Commander Pro (which has all fan power connectors on it, the usb cable from the LED HUB and the usb cable from the AIO - it says USB only but I read here you can connect it that way) I also connected all Sata cables to my power supply. And the 3 pin from the AIO to the motherboard. I hope I didnt forget to mention something. So my question is, is it okay to connect the fans and RGB of the radiator from the AIO to the commander and only connect the 3 pin to the motherboard? I just have the weird feedling i forgot something. Especially the AIO gives me a headache bevause i connected everything to the commander between the thing ony cpu and the fans on the radiator. I hope someone has time to help me out �� Edit: This is what i have: 4 x RGB fans 1 x h115i with 2 x RGB fans 1 x led strip? (comes with case i guess) 1 x RGB Hub 1 x LED Hub 1 x Commander Pro