Jump to content
Corsair Community

GSXswe

Members
  • Posts

    5
  • Joined

Reputation

11 Good

About GSXswe

  • Birthday 06/15/1973
  1. Try to change the USB header for the cooler to another one and try again.
  2. (SOLVED!) I finally managed to unbrick my Corsair iCUE H150i RGB PRO XT !!! Created a new post so people can find this fast, I had problems finding this when searching for my AIO. It bricked during firmware update via iCue. RGB turned off and fans went full throttle and iCue lost contact with AIO. I'm gona give you the steps I followed and will hope that this will save someone lots of time and problems. Start with a check that you are running the lastes iCue app version, if not install the latest then continue with the steps below: 1. Download the H150_Pro_XT_V1.1.31 firmware file from: http://www.mediafire.com/file/kmslc6o3ggzfpqy/CUEVQIupN3b6a9964-aaea-44be-968a-1c88e1fa4dba_temp_H150_Pro_XT_V1.1.31.hex/file (Rename it ti something shorter like: H150_Pro_XT_V1.1.31.hex) 2. Restart Windows 10 in safe mode (Safe Mode: Shift + Restart in Windows, Troubleshoot > Advanced options > Start-up Settings > Restart > F4 = Safe Mode without network). 3. Make sure none of the Corsair processes started, open Task Manager with CTRL+SHIFT+ESC and check and End Task if they are running. 4. Go to Services (CTRL+SHIFT+ESC (Taskmanager) -> Services -> Open Services at the bottom) and STOP/DISABLE the Corsair Services. (3 of them total, you will need to enable them again after firmware is updated and you rebooted out of Safe Mode, then reboot again after that) 5. Go to Corsair installation folder (C:\Program Files (x86)\Corsair\CORSAIR iCUE Software\ , on my machine) and locate the following application (DO NOT OPEN IT OR RUN IT!) XMCBOOTLOADER.EXE. 6. DRAG AND DROP the .hex file from step 1 over the XMCBOOTLOADER.EXE. The app should now connect to the bootloader, and force the firmware upgrade in a CMD window. When the flash is done the RGB will light up instantly and the fans will go to quiet mode. If you get an error during first time, do not panic! Try again, sometimes it can take up to 3-4 attempts to get it to flash all the way. 7. Reboot into normal Windows mode and enable (automatic) all 3 services for Corsair app, then reboot again and check iCue if it can connect to AIO. ALSO, when you want to upgrade the firmware via iCue (very risky), do it in safe mode! Some processes interfere with the connection between the AIO and iCue (HWInfo, Steam, Logitech control app and so on) Good luck! :-)
  3. (SOLVED!) I finally managed to unbrick my Corsair iCUE H150i RGB PRO XT !!! It bricked during firmware update via iCue. RGB turned off and fans went full throttle and iCue lost contact with AIO. I'm gona give you the steps I followed and will hope that this will save someone lots of time and problems. Start with a check that you are running the lastes iCue app version, if not install the latest then continue with the steps below: 1. Download the H150_Pro_XT_V1.1.31 firmware file from: http://www.mediafire.com/file/kmslc6o3ggzfpqy/CUEVQIupN3b6a9964-aaea-44be-968a-1c88e1fa4dba_temp_H150_Pro_XT_V1.1.31.hex/file (Rename it ti something shorter like: H150_Pro_XT_V1.1.31.hex) 2. Restart Windows 10 in safe mode (Safe Mode: Shift + Restart in Windows, Troubleshoot > Advanced options > Start-up Settings > Restart > F4 = Safe Mode without network). 3. Make sure none of the Corsair processes started, open Task Manager with CTRL+SHIFT+ESC and check and End Task if they are running. 4. Go to Services (CTRL+SHIFT+ESC (Taskmanager) -> Services -> Open Services at the bottom) and STOP/DISABLE the Corsair Services. (3 of them total, you will need to enable them again after firmware is updated and you rebooted out of Safe Mode, then reboot again after that) 5. Go to Corsair installation folder (C:\Program Files (x86)\Corsair\CORSAIR iCUE Software\ , on my machine) and locate the following application (DO NOT OPEN IT OR RUN IT!) XMCBOOTLOADER.EXE. 6. DRAG AND DROP the .hex file from step 1 over the XMCBOOTLOADER.EXE. The app should now connect to the bootloader, and force the firmware upgrade in a CMD window. When the flash is done the RGB will light up instantly and the fans will go to quiet mode. If you get an error during first time, do not panic! Try again, sometimes it can take up to 3-4 attempts to get it to flash all the way. 7. Reboot into normal Windows mode and enable (automatic) all 3 services for Corsair app, then reboot again and check iCue if it can connect to AIO. ALSO, when you want to upgrade the firmware via iCue (very risky), do it in safe mode! Some processes interfere with the connection between the AIO and iCue (HWInfo, Steam, Logitech control app and so on) Good luck! :-)
  4. Thanks for the tip, I have already switched to a Dark Rock PRO from another system I have at home, couldn't wait... :) Will wait for support to reach out and we will see what happens.
  5. Hi all! Today iCue suggested a firmware update for me, and now my AIO is dead: FANs at full RPM, no RGB and iCue no longer recognize AIO. Have tried many things and no luck, changed USB port, restarted service and so on... :( Going to create a ticket now with support, but I would love to get some quick tips if someone have them... Cyberpunk 2077 is waiting. *cry* Many thanks!
×
×
  • Create New...