Strolla

Icue 5 and on has never worked for me at all. I have Corsair DDR5 Dominator 6200mhz kit, and ever since iCue 5 has come out, it will not read the temps, it will not do the RGB with the Ram. It will turn the ram lighting on when it is all turned off. To get it to start to work, I will have to force a firmware update. or uninstall iCue and install the older 4.33. Then when the PC is shut down, when it is restarted the RAM will not work again, and I have to repeat the steps. This is a huge inconvenience, and every time I use my PC. This problem has only happened since iCue 5 Icue was also crashing when I play games. And loses control of my AIO (H115i elite capellix) and other fans connected to its controller. This problem has only happened since iCue 5 So everything works normal on 4.33, with no issues or problems. All integration is off, all 3rd part RGB and monitoring, all window/driver updates up too date. 100% sure it is iCue 5. or later

Could we add support for ASUS ROG Strix LC II ARGB AIO next update thanks.

I would like too see this added to icue if possible. I have a ASUS LC2 AIO, I'm guessing it would be similar in control to Corsair iCue H1--i RGB Pro XT. As they are both USB2 connection for the RGB.

Height?

Height? I hope 53mm or less for a upcoming build.

It might have these option, like I said, But they do not work. I will still light up the whole house. You can select it, but does not work. Needs to be fixed. Also, if you enable link lighting with a Nexus iCue (turn on or off), you can not assign any rooms or anything, there is no option.

No you can not, Even If you select a room, it will still light all lights in the house. You need to be able to Remove rooms in the software, as you can not. Only way I can get it to not do it, is too ether turn the bulb off at the wall/mains or turn it off in the Hue App via phone. Many other users have reported the same. Quick google and you will see. And this post here - https://forum.corsair.com/v3/showthread.php?t=205451 CTRL+LeftClick does not work. If I set my system to link lighting it does not put a effect in the lighting on the Hue menu in iCue, even tho it control the bulbs. So how can you remove it? If CTRL+LeftClick even worked, it would not work here too. Add do you expect users to remove it every time they switch there lighting option. I think you need to add remove Hue device option, this will make many people happy.

That is dumb and really dumb, Who uses cabled headphones. Also when buying the items, it says nothing about that you need these items to have that. Corsair you have gone down hill so fast and bad once you became public.

This needs a fix ASAP, when I use link lighting the whole house lights change. Want it in just one room.

K100 not working with Audio Visualizer. Only way I can get it to work is to put the sound source as my ST100, which wont work for as I am using USB wireless headphones now a jack cabled mic. If I do set it as the ST100, my keyboard will work, but the lighting does not respond as well as on my head set So the only option I can see really is that I can not have it on my keyboard as I lose it on everything else. Why Corsair would you set in up like this. So you can only use it with the headset. This needs a fix ASAP. Also the ST100, MM700, Philips Hue and Vengeance RGB Pro don't have Audio Visualizer lighting, fix this too.

Come on Corsair, you keep saying that there will be updates and things added to the Nexus. Has been near a year and still nothing. This product is abandon by the look of it then.

When you keep saying that then we get no updates for this long, im guessing that really stands for no updates and we are forgetting about the product. Sorry but if you keep saying it and nothing happens, we have no choice but to think its not going to happen and we got scammed buying this product.

Looks and feels worse then the old iCue

Thing im disapointed the most about the iCue Nexus, is that we keep asking for more things to be fix and added, and they keep saying they are coming. Bit still nothing added. Been a fair few months now. Will we ever get any updates, not looking likely.

Got mine about a hour ago. Problems : -Color wave setting is not right I think. It just pulsars the same color twice then the hub then switches color. I would think it would be a bit smoother and slowed a bit. does not match the rest of my corsair products on link lighting, the timing just seem way to out. -The Hub area should be more flat, I know this is tuff to do, but I had a CoolerMaster on before this and it sat way more flat at the connection/hub. -The stitching around the lighting fiber tube fells rough. The Coolermaster one I had was much smoother to the touch, and felt like it was stronger as well. -The 2 Zone light on the pad is garbage as well. If you set the two zones(left and right) to two different colors (e.g. red and blue) It will just mix and make a different color. If I do it on mine it just all goes purple, except the top right and bottom left corner goes pinkish purple. You did not put a small light blocker in the middle ( near bottom left hand corner) of the fiber tubing to make it 2 zone. So it is not really two zone then. You can not display two colors at once. So it looks nothing like your website pictures. Question : -Is there a waterproof rating? cant seem to find any, most large pads do now (the Coolmaster one I had did). Feels like it would be ok, but could be wrong. Thoughts : The modes in link lighting not matching and no waterproof rating, and the Hub area should be more flat, and could be stitched better around the edge, and the light zones don't work. I got the pad so it would match my other Corsair products, and use the link lighting together. But it is off, and does not really match well. If I compare the MM700 to the Coolmaster MP750 XL I had before. At this stage I would recommend the MP750 over the MM700, its cheaper, 10mm longer ( but I do like that the MM700 is 20mm higher) waterproof rated, just as good if not better feel. The 2 port hub is its only saving thing here. If you need a extra usb port then maybe. I did not. But pretty disappointed with this to be honest. This should have been better.

To disable any RGB Ram in Gigabyte RGB Fusion Method 1 (I currently use with Corsair Ram) 1. Close RGB Fusion, check its not running in task manger. 2. Go to RGB Fusion install location. 3. Find the file with SPD in it (there are 2, spd_Dump and spddupm) 4. Delete these files. 5. Restart RGB Fusion, and now should be no RAM. Method 2 (Used with G.Skilll Ram - Method 1 is the easiest) First, make sure RGB Fusion is not running, exit the software and check your task manager for RGBFusion.exe and KillCheck.exe and make sure they are not running. Now go to your install location, default should be C:\Program Files (x86)\GIGABYTE\RGB Fusion. There will be a folder called LIB (C:\Program Files (x86)\GIGABYTE\RGB Fusion\LIB), inside there will be 2 or 3 setup exe's (depending on your version). The one we want is AacDDRSetup, run this and uninstall it. From there you will want to go back to the main folder (C:\Program Files (x86)\GIGABYTE\RGB Fusion) and find a file called AACDDR_Lib.dll (and some cases G.SkilllSdk.dll as well) and delete them. Restart RGB Fusion and the Ram control should now be gone. Hope this helps

I have about 35 profiles on iCue, but when I use the Profiles button to go to the next, I notice it will only do 18 before returning to the start, Missing the other 10+ profiles.

Still happening when using monitoring widgets after 3.34. Does not even need to be on current viewing screen. If you remove all monitoring widgets from iCue, usage drops back down. Pretty bad since this is sold as a monitoring tool.

Please make this a sticky, so we dont get 100 post requesting features

When using monitoring widgets, iCue will use alot more CPU, even after fresh install update to 3.34

And when using monitoring widgets iCue not to use so much CPU

FPS widget. (Transparent and non) Monitor widget. Rez, response and refresh (Transparent and non) Link lighting Widget I can put on any screen, same as one on the command pro screen (Transparent and non). On & Off Widget as well. Fan Profile Widget. I can put on any screen, same as one on the command pro screen (Transparent and non) Date Widget. (Transparent and non) GPU Usage widget (Transparent and non) Volume Widget (Transparent and non) Open iCue Widget. GPU and CPU widget Transparent. Widgets that look like gauges instead of graphs. All Widgets Transparent and Non option. Somewhere we can get the files for the backgrounds from the ads and videos. and share with others ours. And our shared files/profiles. Like a site you can preview before download. Also on my commander Pro screens, I dont have temp sensors hooked up (im guessing that's the one in the photos that's missing on mine. the one between Link Lighting and CPU temps), so its just a blank box, looks ugly, a option to change it to something else would be good. Screen should be bigger, no black border. The size would be right if there where no back border.

Same here, just got my nexus too. And same as Timb320 above. iCue using higher cpu usage. increasing idle temps.