Neekomochi

As simple as that was you were a huge help thank you my friend!

I had to redo the cable management in the back too. Are cables supposed to press up against the back of the motherboard? I assumed not so I just cable tied stuff down so it went around the hole in the back of the case where the cooler mounting bracket goes...

https://imgur.com/a/RYv0jr9 Okay I saw what he did. The three prong connect for the CPU_FAN was in one of the fan controller connections... I pulled that out, put it into the CPU_FAN on the motherboard, then put the two fans into the fan controllers like you said. I watched a few video guides. Is the picture I posted above more accurate for fan speeds now?

I did just see something. Initially when my friend helped me with the build he had the CPU_FAN header had nothing connected to it so I put one of the fans on the radiator to the header. I just noticed the CPU_OPT also has nothing connected to it... would that be the other fan? I’m assuming he ran that fan to a different part of the motherboard. I’m not at home to actually look at it.

My friend installed the pump and I wasn't really following what he was doing. What do I need to look for to verify?

https://imgur.com/a/EkMiqKG This is from Link. I just installed Link, I wasn't even aware of this software till now.

https://imgur.com/a/0IGlUp3 This is what I see when I go into ICUE.

I am a bit of a PC noob. I have built only two PCs, this most recent one with this cooler: https://www.bestbuy.com/site/corsair-hydro-series-h100i-rgb-platinum-120mm-processor-liquid-cooling-system-with-rgb-lighting-black-silver/6306564.p?skuId=6306564&ref=17&loc=11&CampaignID=1066871&SubscriberID=305889320 In my ICUE I noticed today that the #2 Fan is reading 0 RPM. I have gone into the BIOS and set literally all my fans to full power and it did not fix it. Can anyone provide any advice to correct his issue?