mr_1nfern0

Sorry, it seems you've been getting a lot of questions regarding waterblocks for the 3XXX GPUs. I was lucky enough to pick up a Gigabyte 3090 Gaming OC at launch and was hoping to build out a full loop. The rest of my system and peripherals are Corsair so ideally would like to use Hydro X for Icue compatibility. Are there any plans to release a block for this particular SKU or will I need to go 3rd party?

Hi, Hoping for some advice. I'm using the LED kit for under my desk and along the back. For the back of the desk, I have strips on one channel and another 4 on another. My issue is that I don't like the gaps shown in the diffuser between the strips due to the join. The obvious solution is to use a single strip instead, approx 3m x 30LED/M however I've always been dubious about getting the correct colour matching. I had a similar issue with Hue lighting in my kitchen and living room. Could you recommend a 3rd party strip that would be suitable or would a better approach me to shorten the joins between the strips themselves, i.e. remove the connectors and splice the cables so the gap is approx the same as between the LEDs themselves? Current set up below. 5 strips under desk 10 strips back of desk. 5 L100s behind monitors. 4 strips in case 6 LL120s in case 2 LL120s on AIO cooler. I will be adding a further 3 LL120s on the bottom of case when my new GFX riser and USD hub arrives.

ahh, now that is a shame. Hopefully a future release of icue will allow more configurability since more and more people are running exoctic configurations. Your suggestion will be a great improvement over my current fixed LED solution.

Hi, I was wondering if anyone has experience using the LS100 on a triple monitor setup, I currently have 3x27" and would love to use the strips, across the top and sides. 3x450 and 2x250. I was also planning on changing my desk lighting, currently I have a hue lightstrip recessed under outside edge and was looking to replace it. I've got 3 lighting node pros and extensions ordered which were originally to do the monitors and desks but if I'm able to use the LS100 on the monitors, I'lll switch. Thanks G